ESP32 S3 set up issue

[omarzamudio]

Yes, I did your recommendation I enabled "USB CDC On Boot'', and the error results in serial monitor are below (please see attached images for your reference):

ELF file SHA256: a6759c6aa

E (149) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
E (157) esp_core_dump_elf: Elf write init failed!
E (162) esp_core_dump_common: Core dump write failed with error=-1
Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x40376eb1
SPIWP:0xee
modeIO, clock div:1
load:0x3fce2810,len:0xfdc
load:0x403c8700,len:0x4
load:0x403c8704,len:0xabc
load:0x403cb700,len:0x2d40
entry 0x403c8890
E (113) spi_flash: Detected size(8192k) smaller than the size in the binary image header(16384k). Probe failed.

assert failed: __esp_system_init_fn_init_flash startup_funcs.c:95 (flash_ret == ESP_OK)


Backtrace: 0x403764f2:0x3fceb120 0x4037c1d1:0x3fceb140 0x40382c31:0x3fceb160 0x4200a803:0x3fceb290 0x4200bc8b:0x3fceb2b0 0x4200bcc5:0x3fceb2d0 0x40376899:0x3fceb300 0x403cc974:0x3fceb340 0x403ccd39:0x3fceb380 0x403c88fd:0x3fceb4b0 0x40045c01:0x3fceb570 0x40043ab6:0x3fceb6f0 0x40034c45:0x3fceb710