12-30-2024, 08:31 AM
Hello!
I've got an A2 as well as a SIM7600E module.
I saw one of your example codes and they have the UART pins for GSM set as GPIO5 for TX and GPIO13 for RX but on the ESPHome website device post for the A2 it has the GPIO34 for RX and GPIO13 for TX. Which is the correct one?
Also I have followed the examples you have posted using a button press on the A8 for a call and a SMS but using the button component as the A2 doesn't have any buttons.
Another question I have is if the SIM module allows it to connect to the internet using a SIM card if no WiFi or Ethernet is available and how to do so.
Thank you.
I've got an A2 as well as a SIM7600E module.
I saw one of your example codes and they have the UART pins for GSM set as GPIO5 for TX and GPIO13 for RX but on the ESPHome website device post for the A2 it has the GPIO34 for RX and GPIO13 for TX. Which is the correct one?
Also I have followed the examples you have posted using a button press on the A8 for a call and a SMS but using the button component as the A2 doesn't have any buttons.
Another question I have is if the SIM module allows it to connect to the internet using a SIM card if no WiFi or Ethernet is available and how to do so.
Thank you.