10-27-2020, 02:26 PM
I have seen your KC868-COL 's IP is 192.168.0.59 . So now your Node TCP OUT is connect with KC868-COL, not connect with KC868-H32B directly. If use "TCP OUT" node, need connect to KC868-H32B directly.
1: config wifi ssid and password of your router's . this is guide how to do: https://www.kincony.com/how-to-use-kc868...oller.html
2: at wifi LPT230 config website:
in "Other Setting"-- "Protocol" set to "TCP Server"
Port ID: you can write any , such as 5555
Then save and restart.
in Node-Red "TCP OUT" node, set "Connect to " H32B's wifi ip , port =5555
3: work well!
1: config wifi ssid and password of your router's . this is guide how to do: https://www.kincony.com/how-to-use-kc868...oller.html
2: at wifi LPT230 config website:
in "Other Setting"-- "Protocol" set to "TCP Server"
Port ID: you can write any , such as 5555
Then save and restart.
in Node-Red "TCP OUT" node, set "Connect to " H32B's wifi ip , port =5555
3: work well!