F16 ESPHome yaml for home assistant with tuya

[andrei]

Hello,

I am new and I just received my F16 Smart Controller and I have an issue installing the F16-HA on the device. I receive the following error:


"Hash of data verified.
Warning: Image file at 0x0 is protected with a hash checksum, so not changing the flash size setting. Use the --flash_size=keep option instead of --flash_size=16MB in order to remove this warning, or use the --dont-append-digest option for the elf2image command in order to generate an image file without a hash checksum
Compressed 15040 bytes to 10364...
Wrote 15040 bytes (10364 compressed) at 0x00000000 in 0.2 seconds (effective 491.1 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 144...
Wrote 3072 bytes (144 compressed) at 0x00008000 in 0.1 seconds (effective 484.8 kbit/s)...
Hash of data verified.
Compressed 8192 bytes to 47...
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.1 seconds (effective 691.8 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...
INFO Successfully uploaded program.
ERROR Logger is not configured!"

I am using the ESPHome Device Builder 2024.12.2

looking forward for some help.

Thank you and best regards,
Andrei