Temperature and humidity with A6

[Savino]

https://www.kincony.com/forum/showthread.php?tid=2528

hi Admin and thanks for very quickly answer.
Unfortunately the link you forwarded to me is not useful to solve the problem and I still have some questions.

I'm very interested in using kincony products and tryng to make a complete domotic system for my home.
The hardware setup is: kincony mini Server (running homeassistant) connected via RS485 to some expansion board (slaves) type A6. The different A6 board are located in different places in the house (a very big house). Some A6 board are integrated in home assistant via ESPhome, some other via RS485.

So now I need to read the DHT11 sensor connected to one of the A6 board via RS485.

Question:
1) at the link you posted I read that modbus not support read sensor by 1 -wire port. So this mean is impossible?

2) at the same link you say "if you can write arduino code, you can define protocol by yourself.

Now, I'm not so able to write this level of software and I'm asking for kincony support. 
So please, consider to help some users like me, not so able to write complicate software but very interested to use your product. 
Is possible from you to provide this kind of support? This will make your product a good choice for more people and not only for experts in writing software.

Thanks anyway.

Note: What about to make one of your video titled "How to read by RS485 temperature sensor connected to A6 board" this will be great