Temperature and humidity with A6

[Savino]

if you can't write arduino code, you can config by ESPHome, it's easier. we have demo video how to integrate by RS485 "modbus controller" by ESPHome:
https://youtu.be/xmBWzVGpggo
https://youtu.be/xEvOK3R12kc

Hello it seems we don't understood each other.
The video you linked provide info about how to setup modbus controller and manage digital output of A6 board by RS485.
The video doesn't provide info about how to configure modbus controller in order managing temperature sensor attached to the 1 wire input of A6.
I'm asking for this information, I have already yaml file to manage digital input and digital output of A6 board by RS485, now I would like to get additional info to add in the yaml file to read 1 wire sensor connected to the A6.
The video doesn't provide this info and the protocol document you linked doesn't provide this info too.
Could you provide this specific info?