01-29-2025, 01:47 PM
I received my KC868 yesterday but I need to change it's IP address to 192.168.0.xxx.
However, I am unable to connect to it over my LAN. I have set my routers static address to 192.168.1.1 and I can see the board on my network by scanning the network with an IP Scanner which identifies the board as 192.168.1.200.
Even so, I can not connect to the board using Firefox and the Kincony UDP_SCAN_LIST tool doesn't find the board on my LAN.
The board is a bit of an overkill for my application as I simply want to monitor 8 alarm inputs over my network and I now realise that I may not be capable of using all the facilities that come with the board but surely, even with my limited knowledge, I should be able to connect to it.
Can anybody suggest where I may be going wrong please.
However, I am unable to connect to it over my LAN. I have set my routers static address to 192.168.1.1 and I can see the board on my network by scanning the network with an IP Scanner which identifies the board as 192.168.1.200.
Even so, I can not connect to the board using Firefox and the Kincony UDP_SCAN_LIST tool doesn't find the board on my LAN.
The board is a bit of an overkill for my application as I simply want to monitor 8 alarm inputs over my network and I now realise that I may not be capable of using all the facilities that come with the board but surely, even with my limited knowledge, I should be able to connect to it.
Can anybody suggest where I may be going wrong please.