A32 Pro ESPHome yaml include RS485 modbus temperature humidity sensor

[xarouli5]

modbus_controller:
  - id: modbus_sensor
    address: 0x01  # device address
    modbus_id: modbus1

sensor:
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Temperature Sensor"
    id: temperature_sensor
    address: 0x0000
    register_type: holding
    value_type: U_WORD
    unit_of_measurement: "°C"
    accuracy_decimals: 1
    filters:
      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
   
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Humidity Sensor"
    id: humidity_sensor
    address: 0x0001
    register_type: holding
    value_type: U_WORD
    unit_of_measurement: "%"
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

How can we find:

Device address
Temp sensor address
Humidity address ?