KCS v3 for AG8 IR protocol

[admin]

UDP Server / TCP Server / Loxone / RS232:

Learn IR (MAX support 192 IR signals):

send:  RELAY-IR-LEARN-255,1,2    // begin learn IR signal ID=1, send by IR tube-2
receive: RELAY-IR-LEARN-255,1,OK  // success
receive: RELAY-IR-LEARN-255,1,TIMEOUT  // timeout

send: RELAY-IR-LEARN-255,200  // if send IR exceeding the maximum IR ID(MAX=192)
receive: RELAY-IR-LEARN-255,200,ERROR  // error

Send IR:

send: RELAY-IR-RUN-255,1  // send IR signal ID=1
receive: RELAY-IR-RUN-255,1,OK

Delete IR:

send: RELAY-IR-DEL-255,1  // delete learned IR signal ID=1
receive: RELAY-IR-DEL-255,1,OK
---------------------------------------------------------------
UDP Client / TCP Client / Loxone / RS232:

IR triggered and auto feedback: (ONLY use for NEC and RC5 IR code)

RELAY-GET_IR-255,1,1,OK  // trigger
RELAY-GET_IR-255,1,0,OK  // not trigger

   
   
---------------------------------------------------------------

MQTT:

Learn IR:  // begin learn IR signal ID=1, send by IR tube-2
payload:
{
  "learn_ir": {
    "value": 1,
    "tx_channel": 2
  }
}

Delete IR:  // delete learned IR signal ID=1

payload:
{
  "run_ir": {
    "value": 1
  }
}

IR triggered and auto feedback:  // trigger when value=1  (ONLY use for NEC and RC5 IR code)

payload:

// trigger begin
{
  "ir1": {
    "value": 1
  }
}

// trigger end
{
  "ir1": {
    "value": 0
  }
}
   
   
   
---------------------------------------------------------------
RS485 Modbus

// 01: Address 
// 08: Function code - Learn IR
// 00 05: Register address, 05 means ID=6 because ID begin with 0
// 00 04: Send IR tube, values range from 1-8. 04 means the 4th channel 
// F1 C9: CRC 
[Tx] 01 08 00 05 00 04 F1 C9 

// 01: Address 
// 08: Function code - Learn IR
// 02: Data length 
// 00 05: Data value, corresponding to the register address when transmitting 
// 7A 63: CRC 
[Rx] 01 08 02 00 05 7A 63 

---------------------------

// 01: Address 
// 07: Function code - Send IR
// 00 02: Register address, send IR at index 2, which ID=3 
// 00 01: Register count, fixed value 1, only one infrared can be controlled at a time 
// D4 0A: CRC 
[Tx] 01 07 00 02 00 01 D4 0A 

// 01: Address 
// 07: Function code - Send IR
// 02: Data length 
// 00 02: Data value, corresponding to the register address when transmitting 
// 38 B5: CRC 
[Rx] 01 07 02 00 02 38 B5 

---------------------------

// 01: Address 
// 09: Function code - Delete IR
// 00 07: Register address, 07 means ID=8 
// 00 01: Register count, fixed value 1, only one infrared can be deleted at a time 
// AD CA: CRC 
[Tx][11:32:00.669] 01 09 00 07 00 01 AD CA 

// 01: Address 
// 09: Function code - Delete IR
// 02: Data length 
// 00 07: Data value, corresponding to the register address when transmitting 
// FA 5E: CRC 
[Rx][11:32:01.959] 01 09 02 00 07 FA 5E