11-14-2021, 02:00 PM
KinCony application can't work with Sonoff wifi device.
you can connect curtain motor to relay controller, use wall switch panel connect to "switch terminal board", every motor will use two relay output. switch panel one button for OPEN, one button for CLOSE. "switch termial board" have two work mode. if you want to work with curtain or motor type product, just set to "motor" mode. so that when you press OPEN button on switch panel, relay1 ON, relay2 OFF, press CLOSE button on switch panel, relay1 OFF, relay2 ON, when motor is running, press any button will STOP, just relay1 OFF, relay2 OFF.
you can connect curtain motor to relay controller, use wall switch panel connect to "switch terminal board", every motor will use two relay output. switch panel one button for OPEN, one button for CLOSE. "switch termial board" have two work mode. if you want to work with curtain or motor type product, just set to "motor" mode. so that when you press OPEN button on switch panel, relay1 ON, relay2 OFF, press CLOSE button on switch panel, relay1 OFF, relay2 ON, when motor is running, press any button will STOP, just relay1 OFF, relay2 OFF.