First Steps, need help

[admin]

1. new board no firmware inside of ESP32, you need download KCS v2 firmware by USB-C cable firstly. here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

2. after downloaded KCS v2 firmware, connect with ethernet cable, the board will work as DHCP mode, just login by ip address in web browser. please see online guide firstly.

3. after downloaded KCS v2 firmware, open "protocol“ webpage, enable MQTT protocol.

4. mqtt protocol document: https://www.kincony.com/forum/showthread.php?tid=3105