No AP appears

[ahmed-KC868-A6]

Title:  KC868-A6 SoftAP Web Server using Flowcode - Getting

Code:

ERR_CONNECTION_REFUSED

Body: Hello KinCony Team and Community,
I am working with the KC868-A6 board (ESP32 version) using Flowcode 11. My goal is to set up the board as a standalone Wi-Fi Access Point (SoftAP) to control the 6 relays via a local web browser interface (

Code:

192.168.4.1

).
The Problem: Although the ESP32 successfully creates and broadcasts the Wi-Fi Access Point (and my phone/PC connects to it without issues), whenever I try to open

Code:

[http://192.168.4.1](http://192.168.4.1)

in the browser, it immediately fails with

Code:

ERR_CONNECTION_REFUSED

.
My Current Logic Structure in Flowcode:

1. Code:

   PCF8574::Initialise()
2. Code:

   WLAN_ESP32::Initialise()
3. Code:

   WLAN_ESP32::CreateAccessPoint("AHMED-KC868-A6", "12345678", 1, 3)
4. Code:

   6 seconds delay
5. Code:

   WLAN_ESP32::SocketListen(80)
6. Inside
   
   Code:

   Loop forever
   :
   • Code:

     WLAN_ESP32::SocketRead(...)
   • Checking HTTP GET requests (
     
     Code:

     /r1/on
     ,
     
     Code:

     /r1/off
     , etc.) and updating
     
     Code:

     PCF8574::WritePort
   • Code:

     SocketWrite
     (HTTP 200 OK header & HTML chunks)
     
   • Code:

     WLAN_ESP32::SocketClose()
   • Code:

     WLAN_ESP32::AcceptClose()
   • Code:

     WLAN_ESP32::AcceptOpen()
   • Code:

     100 ms delay

My Question: What is the correct macro sequence and logic in Flowcode to properly handle incoming HTTP connections on port 80 for the KC868-A6? Why is the browser getting a "Connection Refused" error even though the socket is listening and AP is active?
Any example flowchart or guidance would be greatly appreciated. Thank you!