03-12-2022, 08:03 AM
1. KBOX android phone app have two work mode. A: MQTT B:TCP A is work for internet B is work for local network, without internet can work. firstly you can set controller's work mode for "MQTT" or "TCP" in network setting, let KBOX's work mode as same as controller's network setting is ok.
2. you can use KC868-AG or KC868-G or KC868-Uair to send IR or RF 433MHz signal to third device.
3. COLB is a input module , connect with all sensors, it can do IFTTT automatic command to control H32BS or H32B controller. KC868-Server also can make logical , it have 16 channel DI and 4 channel AI and some GPIOs for DIY, if not enough input ports for use, then you can integrate COLB to KC868-Server, so that will add 16 channel DI + 16 channel AI +5 channel temperature sensors.
2. you can use KC868-AG or KC868-G or KC868-Uair to send IR or RF 433MHz signal to third device.
3. COLB is a input module , connect with all sensors, it can do IFTTT automatic command to control H32BS or H32B controller. KC868-Server also can make logical , it have 16 channel DI and 4 channel AI and some GPIOs for DIY, if not enough input ports for use, then you can integrate COLB to KC868-Server, so that will add 16 channel DI + 16 channel AI +5 channel temperature sensors.