K868-A16 433 RF MHz receiver

[Razvan]

1. Okay, I'll wait until Monday for your conclusion.

2. It's the only one RF receive module I have now. I bought a K868-A16 equipped with RF modules to test it. I want to make a smart home that is controlled by Home Assistant through ESPhome and the modules produced by you "Kincony" seem to me the best for what I want to do.

3. It is not physically possible to install the receive RF module in the wrong position together with the transmit RF module at the same time. You can try to do this and you will see why.

Even if the receive RF module is defective it is not so important, I can buy another one at the next order.
What interests me is to see that the K868-A16 can receive RF signals in order to continue with the design of the house using this module.
If it doesn't work I'll have to look for another solution. Maibe will be a good idea for you ( If you have time) to make an video about this, someting similar with "Lesson 31" but this time for KC868-A16 board.

P.S. It would be nice to implement the RF function in your new KC868-A32 board and have RF receive/ transmit on it.
Will be like a dream come true for those DIYer who use ESPhome with Home Assistant.