Not working extended 32ports board - how to connect

[Kam5]

just need ST-link usb cable, https://www.aliexpress.com/item/33023499...6c0akE7CfH
if you have programmer for ST MCU, also is ok.
give me your relay controller model, is it KC868-H8? I will send you firmware.

Dear  Admin I have this one KC868-H32 PLC from 12.2019


also I have programmer ST-Link v2. Could You check and confirm that it will be enought for programming?



Description:

-ST-LINK/V2 is designed for STM8 series and STM32 series MCU simulation and online download development tools.
-STM32 series connect to ST-LINK/V2 through the JTAG/SWD interface 
-STM8 series connect  to ST-LINK/V2 through the SWIM interface
-ST-LINK/V2 connect PC via high-speed USB2.0
-Support all with SWIM interface STM8 series MCU
-Support Kernel M0,M1,M2,M3,M4 with JTAG/SWD interface STM32 series MCU

Support the next developing software:

ST-LINK Utility v2.0 (and above version)
STVD Version 4.2.1(and above version)
STVP Version 3.2.3(and above version)
IAR EWARM Revision v6.20(and above version)
IAR EWSTM8 Revision v1.30(and above version)
KEIL RVMDK Revision v4.21(and above version)
ATOLLIC
TASKING


----------------------------------

Thank You for support.