KC868-Server V1.48 new firmware update

[admin]

improvement:

add manufactory test commands for RS232

command-1 for set to test mode:
    set static IP:192.168.1.200 for ethernet
    set wifi work mode=TCP Server
    set ethernet work mode=TCP Server
    enable 4 chanenl analog input auto report
    set board RS485 address=1
    set board RS485 Baud rate=9600bps

command-2 for Restore factory settings:
    set wifi work mode=UDP
    set ethernet work mode=UDP
    disable 4 channel analog input auto report


  KC868_SERVER_V148_220413.zip (Size: 54.15 KB / Downloads: 342)
download the ZIP file , unzip update the bin file for KC868-H32B relay controller by USB-RS232 cable or ethernet cable.