[Arduino IDE demo source code for KC868-A6]--#11-SX1278-sender_code

[KinCony Support]

[Arduino IDE demo source code for KC868-A6]--#11-SX1278-sender_code

Code:

/*SX1278_sender code for KC868-A6*/
#include <LoRa.h>
#include <SPI.h>

#define ss 5
#define rst 21
#define dio0 2

int counter = 0;

void setup()
{
  Serial.begin(115200);
  while (!Serial);
  Serial.println("LoRa Sender");

  LoRa.setPins(ss, rst, dio0);    //setup LoRa transceiver module
 
  while (!LoRa.begin(433E6))     //433E6 - Asia, 866E6 - Europe, 915E6 - North America
  {
    Serial.println(".");
    delay(500);
  }
  LoRa.setSyncWord(0xA5);
  Serial.println("LoRa Initializing OK!");
}

void loop()
{
  Serial.print("Sending packet: ");
  Serial.println(counter);

  LoRa.beginPacket();   //Send LoRa packet to receiver
  LoRa.print("hello ");
  LoRa.print(counter);
  LoRa.endPacket();

  counter++;

  delay(2000);
}

   
  11.sx1278-sender.zip (Size: 945 bytes / Downloads: 312)
  11.sx1278-sender.zip (Size: 945 bytes / Downloads: 312)