[Arduino IDE demo source code for KC868-A8S]--#12-KC868-A8S_sms_code

[KinCony Support]

[Arduino IDE demo source code for KC868-A8S]--#12-KC868-A8S_sms_code

Code:

//code use for KC868-A8S board
const char phone[] = "13100000000";  //replace for your mobile phone number

int data;
String message;
unsigned long int last;

void setup()
{

Serial.begin(115200);
Serial2.begin(115200);
 
 
  Serial.print("start test");

  send_sms("Test message from KinCony KC868-A8S");
}

void loop()
{
check_sms_responce();
}

void send_sms ( String sms)
{
      Serial2.print("AT+CMGF=1\r");  //Set text mode
      delay(1000);
      Serial2.print("AT+CMGS=\""+String(phone)+"\"\r"); //Send message
      delay(1000);
      Serial2.print(sms);//Text message
      Serial2.println((char)0x1A); //Ctrl+Z
}

void check_sms_responce()
{
   if(Serial2.available()>0)
  {
    delay(60);
    message="";
    while(Serial2.available())
    {
      message+=(char)Serial2.read();
    }
    Serial.print(message);
  }
}