07-27-2022, 12:29 PM
after flash complete, change the boot jumper for startup system.
when power on, after about 3 minutes
you can use http://homeassistant.local:8123/ or http://X.X.X.X:8123 to login home assistant.
make sure your computer and KC868-Server connect with same router, in one local network.
you said: (replace X.X.X.X with your KC868-Server's IP address) it's wrong. KC868-Server will have two IP address, one is for kincony system's , another is Raspberry PI's . because KC868-Server have a Raspberry PI inside.
this ip is your Raspberry PI's IP address.
if you want to know Raspberry PI's IP, login router to see it.
when power on, after about 3 minutes
you can use http://homeassistant.local:8123/ or http://X.X.X.X:8123 to login home assistant.
make sure your computer and KC868-Server connect with same router, in one local network.
you said: (replace X.X.X.X with your KC868-Server's IP address) it's wrong. KC868-Server will have two IP address, one is for kincony system's , another is Raspberry PI's . because KC868-Server have a Raspberry PI inside.
this ip is your Raspberry PI's IP address.
if you want to know Raspberry PI's IP, login router to see it.