Lesson29- How to use tasmota for KC868-A8 via PCF8574 IIC extend GPIO

[Rodrigorjn]

Thanks for "blakadder" from https://blakadder.com supply the tasmota firmware BIN file for KC868-A8
details you can see : https://blakadder.com/kincony-KC868-A8



1. download tasmota firmware for KC868-A8


2. After you get it running on your Wi-Fi network, set the template in " Configuration - Other"
copy this code:

{"NAME":"KC868-A8","GPIO":[32,0,1120,0,640,608,0,0,0,1,1,1152,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,1],"FLAG":0,"BASE":1,"CMND":"EthClockMode 3 | EthAddress 0 | EthType 0 | I2CDriver2 1"}

3. After applying the template you need one more configuration step. Navigate to " Configuration - Configure PCF8574 " and set the PCF8574 connected to relays to Output.

hello friend, I have a doubt, with the tasmota installed, how can I activate the relays through the pulse input? I can only activate it through the app.

---

Thanks for "blakadder" from https://blakadder.com supply the tasmota firmware BIN file for KC868-A8
details you can see : https://blakadder.com/kincony-KC868-A8



1. download tasmota firmware for KC868-A8


2. After you get it running on your Wi-Fi network, set the template in " Configuration - Other"
copy this code:

{"NAME":"KC868-A8","GPIO":[32,0,1120,0,640,608,0,0,0,1,1,1152,0,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,1],"FLAG":0,"BASE":1,"CMND":"EthClockMode 3 | EthAddress 0 | EthType 0 | I2CDriver2 1"}

3. After applying the template you need one more configuration step. Navigate to " Configuration - Configure PCF8574 " and set the PCF8574 connected to relays to Output.

Olá pessoal , estou com uma dúvida , fiz todo processo mas não conseguir acionar os relés pela entrada de pulso , apenas pela web