Home Assistant 2022.12.0

[Mandlap]

I have updated my KC868-server to Home Assistant 2022.12.0, now all my sensors and switches from my KC868-Server are "unavailable".
below is my sample configuration. Is the a new configuration for HA 2022.12.0, as they have been warning that this updates will affect the sensor.
 
mqtt:
  broker: 192.168.0.118
  port: 1883
  username: mqtt
  password: 1232332TESETEST

# Example configuration.yaml entry
switch:
  - platform: mqtt
    name: 'output-1'
    unique_id: output-1
    state_topic: 'server/a767350037679/state'
    command_topic: 'server/a767350037679/set'
    payload_on:  '{"relay1":{"on":1}}'
    payload_off:  '{"relay1":{"on":0}}'
    value_template: '{{ value_json.relay1.on }}'
    state_on: 1
    state_off: 0

  - platform: mqtt
    name: 'output-2'
    unique_id: output-2
    state_topic: 'server/a767350037679/state'
    command_topic: 'server/a767350037679/set'
    payload_on:  '{"relay2":{"on":1}}'
    payload_off:  '{"relay2":{"on":0}}'


binary_sensor:
  - platform: mqtt
    name: 'input-1'
    unique_id: input-1
    state_topic: 'server/a767350037679/state'
    value_template: '{{ value_json.input1.on }}'
    payload_on: 1
    payload_off: 0

  - platform: mqtt
    name: 'input-2'
    unique_id: input-2
    state_topic: 'server/a767350037679/state'
    value_template: '{{ value_json.input2.on }}'
    payload_on: 1
    payload_off: 0
    value_template: '{{ value_json.relay2.on }}'
    state_on: 1
    state_off: 0

sensor:
  - platform: mqtt
    name: 'analog-1'
    unique_id: analog-1
    state_topic: 'server/a767350037679/state'
    unit_of_measurement: 'v'
    value_template: '{{ value_json.analog1.value }} ' 
   
  - platform: mqtt
    name: 'analog-2'
    unique_id: analog-2
    state_topic: 'server/a767350037679/state'
    unit_of_measurement: 'v'
    value_template: '{{ value_json.analog2.value }} '