01-17-2023, 01:42 PM
every time I load this error, how do I fix it?
Arduino: 1.8.19 (Windows 7), Placa:"NodeMCU-32S, 80MHz, 921600"
O sketch usa 213294 bytes (16%) de espaço de armazenamento para programas. O máximo são 1310720 bytes.
Variáveis globais usam 15120 bytes (4%) de memória dinâmica, deixando 312560 bytes para variáveis locais. O máximo são 327680 bytes.
esptool.py v3.0-dev
Serial port COM4
Connecting....
Chip is ESP32-D0WD-V3 (revision 3)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 90:38:0c:a4:30:08
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Warning: Could not auto-detect Flash size (FlashID=0x0, SizeID=0x0), defaulting to 4MB
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.0 seconds (effective 8192.1 kbit/s)...
A fatal error occurred: Timed out waiting for packet header
A fatal error occurred: Timed out waiting for packet header
Este relatório teria mais informações com
"Mostrar a saida detalhada durante a compilação"
opção pode ser ativada em "Arquivo -> Preferências"
Arduino: 1.8.19 (Windows 7), Placa:"NodeMCU-32S, 80MHz, 921600"
O sketch usa 213294 bytes (16%) de espaço de armazenamento para programas. O máximo são 1310720 bytes.
Variáveis globais usam 15120 bytes (4%) de memória dinâmica, deixando 312560 bytes para variáveis locais. O máximo são 327680 bytes.
esptool.py v3.0-dev
Serial port COM4
Connecting....
Chip is ESP32-D0WD-V3 (revision 3)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 90:38:0c:a4:30:08
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Warning: Could not auto-detect Flash size (FlashID=0x0, SizeID=0x0), defaulting to 4MB
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.0 seconds (effective 8192.1 kbit/s)...
A fatal error occurred: Timed out waiting for packet header
A fatal error occurred: Timed out waiting for packet header
Este relatório teria mais informações com
"Mostrar a saida detalhada durante a compilação"
opção pode ser ativada em "Arquivo -> Preferências"