02-02-2023, 10:49 AM
HT1,HT2 use for 1-wire device, such as DS18B20 temperature sensor , WS2812 LED strip.
HT1 is GPIO32, HT2 is GPIO33. you can see the diagram: https://www.kincony.com/download/KC868-A6-schematic.pdf
whether can use for PWM, you need to check with ESP32-WROOM-32E datasheet.
HT1 is GPIO32, HT2 is GPIO33. you can see the diagram: https://www.kincony.com/download/KC868-A6-schematic.pdf
whether can use for PWM, you need to check with ESP32-WROOM-32E datasheet.