02-02-2023, 11:55 PM
the target IP is your H32B Pro power start ip, it will be always 192.168.1.200, you not need to change your board IP. just when power on during some seconds, the board IP will auto to 192.168.1.200
1. fill the local IP is your computer's IP
2. power on of you H32B Pro
3. after powre on, the LED on board will be fast blink, MUST during blink time, click "Connect" button.
4. chose firmware BIN file to Download.
here is video tour: https://youtu.be/JFKeKv8Ks_4
1. fill the local IP is your computer's IP
2. power on of you H32B Pro
3. after powre on, the LED on board will be fast blink, MUST during blink time, click "Connect" button.
4. chose firmware BIN file to Download.
here is video tour: https://youtu.be/JFKeKv8Ks_4