02-05-2023, 12:51 AM
1. sure, you can use COLB pc software to set if saturday 12:30 turn on relat 1,6,9
here is COLB pc software download link:
https://www.kincony.com/download/Kincony...10.504.zip
here is how to use it online guide:
https://www.kincony.com/how-to-use-kc868...oller.html
about the timer, see this photo, check the "week" option and set the TIME for IF command.
2. H32B and H16B not support tuya app directly, if you add our tuya adapter will support to use tuya app. if you buy H32B Pro will support to use Tuya app directly.
3. sure, no problem, just two step.
step1- create scene mode on "kincony smart home" app for turn ON relay2.
video tour: https://youtu.be/XzfLEUbYxI0
step2- set a TIMER work with "scene" mode you have created in step-1
video tour: https://youtu.be/yo2V5dTE43A
4. two way:
a. connect H32B by RS232 or network to your HMI device, you need to program code on your HMI device. you need to see HMI device user manual.
b. just buy a windows OS pad, install our pad software to use H32B and COLB. here is software download link for 10 inch windows Pad:
https://www.kincony.com/download/MulitiB...3.0324.zip
5. not not need to create scene mode for relay1 on, relay2 off. you can update your H32B firmware to the newest version, will support "interlock" function, so that can make sure two relay will never turn ON at the same time by hardware.
here is the newest firmware of H32B:
https://www.kincony.com/forum/showthread.php?tid=2343
here is COLB pc software download link:
https://www.kincony.com/download/Kincony...10.504.zip
here is how to use it online guide:
https://www.kincony.com/how-to-use-kc868...oller.html
about the timer, see this photo, check the "week" option and set the TIME for IF command.
2. H32B and H16B not support tuya app directly, if you add our tuya adapter will support to use tuya app. if you buy H32B Pro will support to use Tuya app directly.
3. sure, no problem, just two step.
step1- create scene mode on "kincony smart home" app for turn ON relay2.
video tour: https://youtu.be/XzfLEUbYxI0
step2- set a TIMER work with "scene" mode you have created in step-1
video tour: https://youtu.be/yo2V5dTE43A
4. two way:
a. connect H32B by RS232 or network to your HMI device, you need to program code on your HMI device. you need to see HMI device user manual.
b. just buy a windows OS pad, install our pad software to use H32B and COLB. here is software download link for 10 inch windows Pad:
https://www.kincony.com/download/MulitiB...3.0324.zip
5. not not need to create scene mode for relay1 on, relay2 off. you can update your H32B firmware to the newest version, will support "interlock" function, so that can make sure two relay will never turn ON at the same time by hardware.
here is the newest firmware of H32B:
https://www.kincony.com/forum/showthread.php?tid=2343