02-28-2023, 09:01 PM
this is what I tried and I am getting the error:
any other suggestions?
Code:
Hardware configuration set to <ST-LINK on USB with STM32F103x8 plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is ON.
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\usr\Local_Work\NET_IAP_DIMMER8_0909.hex in PROGRAM MEMORY area ...
< File successfully loaded. File Checksum 0x1909E8
> Reading OPTION BYTE area...
Error : Wrong device selected ! Check the configuration or the device !
Error : < OPTION BYTE reading failed.any other suggestions?