03-23-2023, 01:24 AM
(This post was last modified: 03-23-2023, 01:29 AM by KinCony Support.)
[Arduino source code for KC868-AIO]-06 RS485
Code:
/*/*WWW.KINCONY.COM*/
/*KC868-AIO code of RS485 */
void setup() {
Serial.begin(115200);
Serial2.begin(115200,SERIAL_8N1,32,33);//AIO
Serial2.println("KC868-AIO RS485 SEND is OK!!");
Serial2.println("******************");
}
void loop() {
/*print the received data of RS485 port*/
while(Serial2.available()>0)
{
Serial2.print((char)Serial2.read());//Read rs485 receive data and print it
}
delay(200);
}