KC868-A64 configure for ESPhome

[nurachese]

check your esphome LOG, it will scan all I2C bus device address and output in LOG. whether one of PCF8575 address is wrong.

Hi,
I posted the  esphome LOG.
address 0x25 is correct since I verified it with voltage levels on pins A0, A1, A2 of  PCF8575.
It seems a failure of PCF8575 (infact after boot all I/Os of that specific IC are high, as described on  PCF8575 datasheet... it seems there is no communication).

Thank you

Marcello