how to enable the USB ports on Raspberry Pi CM4

[sns5400]

To enable the USB 2.0 ports on the Compute Module 4, you need to edit the boot config file (/boot/config.txt) and add:

dtoverlay=dwc2,dr_mode=host
Then reboot the Pi. Now you should be able to use the built-in USB 2.0 ports!

Hello, i have the same problem no usb mouse or keybord on RPI module afther edit and safe /boot/config.txt no result.

dtoverlay=dwc2,dr_mode=host

reboot
no result

other solutions ?