A16 flash problem

[saint_code]

@admin
do you have Tasmota config for KC868-A16 rev 1.6 ?
because this https://templates.blakadder.com/kincony_KC868-A16.html for rev 1.4 not working

PHP Code:

00:00:00.003 HDW: ESP32-D0WD-V3 
00:00:00.079 UFS: FlashFS mounted with 304 kB free
00:00:00.180 CFG: Loaded from File, Count 49
00:00:00.195 QPC: Count 1
00:00:00.286 BRY: Berry initialized, RAM used=3408
00:00:00.311 BRY: no 'preinit.be'
00:00:00.314 I2C: PCF8574 found at 0x21
00:00:00.314 I2C: PCF8574 found at 0x22
00:00:00.315 I2C: PCF8574 found at 0x24
00:00:00.316 I2C: PCF8574 found at 0x25
00:00:00.329 PCF: Total devices 4, PCF8574 output ports 16
00:00:00.334 Project tasmota - Tasmota Version 10.1.0(TasmoCompiler-esp32generic)-2_0_1_1(2022-02-25T09:33:44)
00:00:04.443 BRY: no 'autoexec.be' 


its only PCF8574-2 react on GND + X08 ... GND + X01 on inputs

PHP Code:

11:33:52.896 RSL: RESULT = {"Time":"2023-07-22T11:33:52","PCF8574-2_INP":{"D7":0}}
11:33:52.947 RSL: RESULT = {"Time":"2023-07-22T11:33:52","PCF8574-2_INP":{"D7":1}}
11:34:10.187 RSL: RESULT = {"Time":"2023-07-22T11:34:10","PCF8574-2_INP":{"D7":0}}
11:34:11.038 RSL: RESULT = {"Time":"2023-07-22T11:34:11","PCF8574-2_INP":{"D7":1}}
11:34:11.087 RSL: RESULT = {"Time":"2023-07-22T11:34:11","PCF8574-2_INP":{"D7":0}}
11:34:11.757 RSL: RESULT = {"Time":"2023-07-22T11:34:11","PCF8574-2_INP":{"D7":1}}
11:34:11.831 RSL: RESULT = {"Time":"2023-07-22T11:34:11","PCF8574-2_INP":{"D7":0}}
11:34:12.431 RSL: RESULT = {"Time":"2023-07-22T11:34:12","PCF8574-2_INP":{"D7":1}}
11:34:16.984 RSL: RESULT = {"Time":"2023-07-22T11:34:16","PCF8574-2_INP":{"D7":0}}
11:34:21.504 RSL: RESULT = {"Time":"2023-07-22T11:34:21","PCF8574-2_INP":{"D7":1}}
11:34:28.891 RSL: RESULT = {"Time":"2023-07-22T11:34:28","PCF8574-2_INP":{"D5":0}}
11:34:31.321 RSL: RESULT = {"Time":"2023-07-22T11:34:31","PCF8574-2_INP":{"D5":1}}
11:34:37.215 RSL: RESULT = {"Time":"2023-07-22T11:34:37","PCF8574-2_INP":{"D5":0}}
11:34:42.930 RSL: RESULT = {"Time":"2023-07-22T11:34:42","PCF8574-2_INP":{"D5":1}}