10-29-2023, 08:01 AM
1. yes, you can automatic control light according to your setting from home assistant.
2. yes, if power off -> on, system will auto restart.
3. if you want to use ZigBee device. need add ZigBee USB-dongle or "KC868-AG Pro" ZigBee3.0 Hub. when power off->on, not need to re program setting, it have remembered.
4. will not lose.
5. we suggest use ethernet, wired solution is most stable, wireless product support ZigBee device, just need add ZigBee Hub or ZigBee usb dongle.
65+ lights control by dumb light switches (use by KC868-H32B Pro relay controller)
4 mini split ac conditioning – automated to work only during solar power (use by KC868-AG Pro)
A series of motion/pir sensors (use by KC868-AI)
Motorized blinds (use by KC868-H32B Pro relay controller)
Dimmable lights (use by KC868-D16 dimmer controller)
Multiway light switch (use by any momentary switch panel)
Water level monitor (any KinCony A series board with "analog input port")
2. yes, if power off -> on, system will auto restart.
3. if you want to use ZigBee device. need add ZigBee USB-dongle or "KC868-AG Pro" ZigBee3.0 Hub. when power off->on, not need to re program setting, it have remembered.
4. will not lose.
5. we suggest use ethernet, wired solution is most stable, wireless product support ZigBee device, just need add ZigBee Hub or ZigBee usb dongle.
65+ lights control by dumb light switches (use by KC868-H32B Pro relay controller)
4 mini split ac conditioning – automated to work only during solar power (use by KC868-AG Pro)
A series of motion/pir sensors (use by KC868-AI)
Motorized blinds (use by KC868-H32B Pro relay controller)
Dimmable lights (use by KC868-D16 dimmer controller)
Multiway light switch (use by any momentary switch panel)
Water level monitor (any KinCony A series board with "analog input port")