11-26-2023, 08:56 AM
(This post was last modified: 11-26-2023, 10:42 AM by zeltini1401.)
Because the Lan wire is not identified. I think if I put another sketch, the lan wire will be identified. I started from the beginning. I loaded only the KCS_KC868_A16_V2.1.9.bin file according to the instructions. There is a wifi network. Lan cable shows as "Unidentified Network".
I also changed the IP address in the Lan properties to: 192.168.1.200
255.255.255.0 but no change.
I also changed the IP address in the Lan properties to: 192.168.1.200
255.255.255.0 but no change.