KCS firmware - MQTT LWT?

[DieterN]

Hello
I have set the Temperature Threshold to 0.1.
The numbers are changing when th relais are change or the adc numbers only!!! (another user have the same problem!)

To switch the relais from my MQTT server I test it with :
set MQTT2_FCB4671111D0 output1_valve true
set MQTT2_FCB4671111D0 output1_value on
set MQTT2_FCB4671111D0 output1_valve on
set MQTT2_FCB4671111D0 output1_value on
set MQTT2_FCB4671111D0 output1 on/off/true/false
nothing work

[admin]

1. i don't know which board you are using?  what sensor you are using? how you wire? take photo!
2. take a screen photo what command you have send to control relay.

[DieterN]

1. i don't know which board you are using?  what sensor you are using? how you wire? take photo!
2. take a screen photo what command you have send to control relay.

1.KC868-A8
   

   

from my MQTT Server:
   


To switch the relais from my MQTT server I test it with :
set MQTT2_FCB4671111D0 output1_valve true
set MQTT2_FCB4671111D0 output1_value on
set MQTT2_FCB4671111D0 output1_valve on
set MQTT2_FCB4671111D0 output1_value on
set MQTT2_FCB4671111D0 output1 on/off/true/false
nothing work 


PS: the values different because different times

[admin]

   
   
This is turn ON relay1, relay2, relay3 for A8 board demo .
this payload should be: 
{"output1":{"value":true}},{"output2":{"value":true}},{"output3":{"value":true}}
   

[admin]

about sensor auto feedback mqtt problem, we will check and feedback later.

[DieterN]

about sensor auto feedback mqtt problem, we will check and feedback later.

Thank you.
I found a next problem.
In the KC868 Monitor I see adc2: 3,3 V
In the MQTT broker I see adc2_value:2535


regarding your MQTT box.
I have tested it with MQTT explorer, but no error or relais function.
see below
   
I hope you can solve also.
thanks in advance

[admin]

1. Can you control relay ON/OFF by mqtt command now?
2. after you download KCS firmware, "Monitor" webpage showed config value, you can preset the range and unit. the MQTT feedback "2535", that is RAW code.
for example: 0---4095 RAW code can set to 0--5V or 0--10 meter or ......

[DieterN]

1. Can you control relay ON/OFF by mqtt command now?
2. after you download KCS firmware, "Monitor" webpage showed config value, you can preset the range and unit. the MQTT feedback "2535", that is RAW code.
for example:  0---4095 RAW code can set to 0--5V or 0--10 meter or ......

1. no
2. I know thats is the raw code. In the picture obove you can see 3.3V. But my broker see the raw code only. Why not 3.3 !!
The temperature values are correct.

The next problem is the missing LWT status!!

[mustafa@arrabi.net]

Same problem. Temperature from 2 attached DS18B20 sensors is changed ( this change can be seen in web interface Monitor\Sensor\Channel 1 and 2). But no MQTT update is send to MQTT server. Checked with MQTT explorer.
Setting Sensor / Temperature threshold to "0.1" does not have effect.

Setting relay state will update also temperature values.
Workaround from Tarmas to setting

Code:

{"get_datas":{"value":true}}'

works, but this is something what should be fixed in firmware.


Running KC868_A6, Software Version v2.2.2

Where I should add this code? Should I create a new automation in HA and add it there or this has to be added to the sensor configuration?

[lpb19]

Could someone with more experience check the code? Input and output are working. DAC1 and DAC2 do not respond.
# placa ks868-a6
mqtt:
  switch:
  - name: 'KC868_A6-output-1'
    unique_id: KC868_A6-output-1
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    command_topic: 'KC868_A6/CC7B5C303EE0/SET'
    payload_on:  '{"output1":{"value":true}}'
    payload_off:  '{"output1":{"value":false}}'
    value_template: '{{ value_json.output1.value }}'
    state_on: true
    state_off: false

  - name: 'KC868_A6-output-2'
    unique_id: KC868_A6-output-2
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    command_topic: 'KC868_A6/CC7B5C303EE0/SET'
    payload_on:  '{"output2":{"value":true}}'
    payload_off:  '{"output2":{"value":false}}'
    value_template: '{{ value_json.output2.value }}'
    state_on: true
    state_off: false

  - name: 'KC868_A6-output-3'
    unique_id: KC868_A6-output-3
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    command_topic: 'KC868_A6/CC7B5C303EE0/SET'
    payload_on:  '{"output3":{"value":true}}'
    payload_off:  '{"output3":{"value":false}}'
    value_template: '{{ value_json.output3.value }}'
    state_on: true
    state_off: false

  - name: 'KC868_A6-output-4'
    unique_id: KC868_A6-output-4
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    command_topic: 'KC868_A6/CC7B5C303EE0/SET'
    payload_on:  '{"output4":{"value":true}}'
    payload_off:  '{"output4":{"value":false}}'
    value_template: '{{ value_json.output4.value }}'
    state_on: true
    state_off: false

  - name: 'KC868_A6-output-5'
    unique_id: KC868_A6-output-5
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    command_topic: 'KC868_A6/CC7B5C303EE0/SET'
    payload_on:  '{"output5":{"value":true}}'
    payload_off:  '{"output5":{"value":false}}'
    value_template: '{{ value_json.output5.value }}'
    state_on: true
    state_off: false

  - name: 'KC868_A6-output-6'
    unique_id: KC868_A6-output-6
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    command_topic: 'KC868_A6/CC7B5C303EE0/SET'
    payload_on:  '{"output6":{"value":true}}'
    payload_off:  '{"output6":{"value":false}}'
    value_template: '{{ value_json.output6.value }}'
    state_on: true
    state_off: false
   

  binary_sensor:
 
  - name: 'KC868_A6-input-1'
    unique_id: KC868_A6-input-1
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    value_template: '{{ value_json.input1.value }}'
    payload_on: true
    payload_off: false
   
  - name: 'KC868_A6-input-2'
    unique_id: KC868_A6-input-2
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    value_template: '{{ value_json.input2.value }}'
    payload_on: true
    payload_off: false
   
  - name: 'KC868_A6-input-3'
    unique_id: KC868_A6-input-3
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    value_template: '{{ value_json.input3.value }}'
    payload_on: true
    payload_off: false
   
  - name: 'KC868_A6-input-4'
    unique_id: KC868_A6-input-4
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    value_template: '{{ value_json.input4.value }}'
    payload_on: true
    payload_off: false
   
  - name: 'KC868_A6-input-5'
    unique_id: KC868_A6-input-5
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    value_template: '{{ value_json.input5.value }}'
    payload_on: true
    payload_off: false
   
  - name: 'KC868_A6-input-6'
    unique_id: KC868_A6-input-6
    state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
    value_template: '{{ value_json.input6.value }}'
    payload_on: true
    payload_off: false

  sensor:   
    - name: "Sensor 1 Temperature"
      unique_id: KC868_A6-sensor-temperature-1
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      value_template: "{{ value_json.sensor1.temperature }}"
      unit_of_measurement: "°C"
     
    - name: "Sensor 2 Temperature"
      unique_id: KC868_A6-sensor temperature-2
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      value_template: "{{ value_json.sensor2.temperature }}"
      unit_of_measurement: "°C"
     
     
    - name: "ADC-1"
      unique_id: KC868_A6-adc-1
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      value_template: "{{ value_json.adc1.value }}"
      unit_of_measurement: "Unità"
     
    - name: "ADC-2"
      unique_id: KC868_A6-adc-2
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      value_template: "{{ value_json.adc2.value }}"
      unit_of_measurement: "Unità"
     
    - name: "ADC-3"
      unique_id: KC868_A6-adc-3
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      value_template: "{{ value_json.adc3.value }}"
      unit_of_measurement: "Unità"
     
    - name: "ADC-4"
      unique_id: KC868_A6-adc-4
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      value_template: "{{ value_json.adc4.value }}"
      unit_of_measurement: "Unità"
     
     
  light:     
    - name: "dac1"
      unique_id: KC868_A6-dac1
      schema: template
      command_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      state_topic: 'KC868_A6/CC7B5C303EE0/STATE'
      command_on_template: >
      {%- if brightness is defined -%}
      ,{"dac1":{"value":{{(brightness / 255 * 100) | int - 1}}}
      {%- else -%}
      ,'{"dac1":{"value":99}}'
      {%- endif -%}
     
      command_off_template: '{"dac1":{"value":0}}'

      state_template: >
      {%- if value_json.dac1.value == 0 -%}
        off
      {%- else -%}
        on
      {%- endif -%}
      brightness_template: '{{(value_json.dac1.value / 99 * 255)| int}}'