Smart Home Automation Forum › Technical Support › KC868-A32/A32 Pro v
A32 Pro ESPHome yaml include RS485 modbus temperature humidity sensor

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
A32 Pro ESPHome yaml include RS485 modbus temperature humidity sensor
admin Offline
Administrator
*******
Posts: 6,609
Threads: 844
Joined: Oct 2020
Reputation: 161
#1
10-08-2024, 01:51 AM
   
   
here we use RS485 long distance sensor connect with A32 Pro controller using A and B.
the sensor default setting is 9600bps, RS485 address is 1
   
we can use USB-RS485 adapter connect PC with sensor , monitor the sensor value, or maybe you want change the sensor address and baud rate, so just use PC software to set. Then we can let sensor connect to A32 Pro's RS485 port directly.
   
mainly add these code for modbus:
uart:
  - id: uart_modbus
    baud_rate: 9600
    tx_pin: 9
    rx_pin: 8

# Config Modbus
modbus:
  uart_id: uart_modbus
  id: modbus1

modbus_controller:
  - id: modbus_sensor
    address: 0x01  # device address
    modbus_id: modbus1

sensor:
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Temperature Sensor"
    id: temperature_sensor
    address: 0x0000
    register_type: holding
    value_type: U_WORD
    unit_of_measurement: "°C"
    accuracy_decimals: 1
    filters:
      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
   
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Humidity Sensor"
    id: humidity_sensor
    address: 0x0001
    register_type: holding
    value_type: U_WORD
    unit_of_measurement: "%"
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

whole ESPHome ymal code:
Code:
esphome:
  name: a32-pro-arduino
  friendly_name: a32-Pro-arduino
  platformio_options:
    board_build.extra_flags:
      # WIFI_CONTROL_SELF_MODE = 0
      # WIFI_CONTROL_SELF_MODE = 1
      - "-DWIFI_CONTROL_SELF_MODE=0"

external_components:
  - source:
      type: git
      url: https://github.com/hzkincony/esphome-tuya-wifi-mcu
      ref: v1.2.0

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
# logger:

# Enable Home Assistant API
api:
  encryption:
    key: "fBpihEYPVlfKaE4ZIcY0uRcJ134u7DBKzzskk994+Lw="

ethernet:
  type: W5500
  clk_pin: GPIO42
  mosi_pin: GPIO44
  miso_pin: GPIO40
  cs_pin: GPIO39
  interrupt_pin: GPIO41
  reset_pin: GPIO43

uart:
  - id: uart_modbus
    baud_rate: 9600
    tx_pin: 9
    rx_pin: 8

  - id: tuya_mcu_uart
    baud_rate: 9600
    tx_pin: 15
    rx_pin: 16

tuya_wifi_mcu:
  # tuya mcu product id
  product_id: fwy7fk4mzay3kern
  uart_id: tuya_mcu_uart
  wifi_reset_pin: 21
  wifi_led_pin: 45

# Config Modbus
modbus:
  uart_id: uart_modbus
  id: modbus1

modbus_controller:
  - id: modbus_sensor
    address: 0x01  # device address
    modbus_id: modbus1

i2c:
   - id: bus_a
     sda: 11
     scl: 10
     scan: true
     frequency: 400kHz

xl9535:
  - id: xl9535_hub_out1 # for output channel 1-16
    address: 0x21
  - id: xl9535_hub_out2 # for output channel 17-32
    address: 0x22
  - id: xl9535_hub_in1 # for input channel 1-16
    address: 0x24
  - id: xl9535_hub_in2 # for input channel 17-32
    address: 0x25

pcf8574:
  - id: 'pcf8574_in_3'  # for input channel 33-40
    address: 0x23



switch:

  - platform: gpio
    pin: 45
    name: "LED"

  - platform: gpio
    name: A32 Pro Switch01
    id: "a32_pro_switch01"
    pin:
      xl9535: xl9535_hub_out1
      number: 0
      mode: OUTPUT
      inverted: true
 
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch01 Tuya
    dp_id: 101
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch01"
 
 
  - platform: gpio
    name: A32 Pro Switch02
    id: "a32_pro_switch02"
    pin:
      xl9535: xl9535_hub_out1
      number: 1
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch02 Tuya
    dp_id: 102
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch02"

  - platform: gpio
    name: A32 Pro Switch03
    id: "a32_pro_switch03"
    pin:
      xl9535: xl9535_hub_out1
      number: 2
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch03 Tuya
    dp_id: 103
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch03"

  - platform: gpio
    name: A32 Pro Switch04
    id: "a32_pro_switch04"
    pin:
      xl9535: xl9535_hub_out1
      number: 3
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch04 Tuya
    dp_id: 104
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch04"

  - platform: gpio
    name: A32 Pro Switch05
    id: "a32_pro_switch05"
    pin:
      xl9535: xl9535_hub_out1
      number: 4
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch05 Tuya
    dp_id: 105
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch05"

  - platform: gpio
    name: A32 Pro Switch06
    id: "a32_pro_switch06"
    pin:
      xl9535: xl9535_hub_out1
      number: 5
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch06 Tuya
    dp_id: 106
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch06"

  - platform: gpio
    name: A32 Pro Switch07
    id: "a32_pro_switch07"
    pin:
      xl9535: xl9535_hub_out1
      number: 6
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch07 Tuya
    dp_id: 107
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch07"

  - platform: gpio
    name: A32 Pro Switch08
    id: "a32_pro_switch08"
    pin:
      xl9535: xl9535_hub_out1
      number: 7
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch08 Tuya
    dp_id: 108
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch08"

  - platform: gpio
    name: A32 Pro Switch09
    id: "a32_pro_switch09"
    pin:
      xl9535: xl9535_hub_out1
      number: 10
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch09 Tuya
    dp_id: 109
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch09"

  - platform: gpio
    name: A32 Pro Switch10
    id: "a32_pro_switch10"
    pin:
      xl9535: xl9535_hub_out1
      number: 11
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch10 Tuya
    dp_id: 110
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch10"

  - platform: gpio
    name: A32 Pro Switch11
    id: "a32_pro_switch11"
    pin:
      xl9535: xl9535_hub_out1
      number: 12
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch11 Tuya
    dp_id: 111
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch11"

  - platform: gpio
    name: A32 Pro Switch12
    id: "a32_pro_switch12"
    pin:
      xl9535: xl9535_hub_out1
      number: 13
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch12 Tuya
    dp_id: 112
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch12"

  - platform: gpio
    name: A32 Pro Switch13
    id: "a32_pro_switch13"
    pin:
      xl9535: xl9535_hub_out1
      number: 14
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch13 Tuya
    dp_id: 113
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch13"

  - platform: gpio
    name: A32 Pro Switch14
    id: "a32_pro_switch14"
    pin:
      xl9535: xl9535_hub_out1
      number: 15
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch14 Tuya
    dp_id: 114
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch14"

  - platform: gpio
    name: A32 Pro Switch15
    id: "a32_pro_switch15"
    pin:
      xl9535: xl9535_hub_out1
      number: 16
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch15 Tuya
    dp_id: 115
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch15"

  - platform: gpio
    name: A32 Pro Switch16
    id: "a32_pro_switch16"
    pin:
      xl9535: xl9535_hub_out1
      number: 17
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch16 Tuya
    dp_id: 116
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch16"

  - platform: gpio
    name: A32 Pro Switch17
    id: "a32_pro_switch17"
    pin:
      xl9535: xl9535_hub_out2
      number: 0
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch17 Tuya
    dp_id: 117
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch17"

  - platform: gpio
    name: A32 Pro Switch18
    id: "a32_pro_switch18"
    pin:
      xl9535: xl9535_hub_out2
      number: 1
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch18 Tuya
    dp_id: 118
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch18"

  - platform: gpio
    name: A32 Pro Switch19
    id: "a32_pro_switch19"
    pin:
      xl9535: xl9535_hub_out2
      number: 2
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch19 Tuya
    dp_id: 119
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch19"

  - platform: gpio
    name: A32 Pro Switch20
    id: "a32_pro_switch20"
    pin:
      xl9535: xl9535_hub_out2
      number: 3
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch20 Tuya
    dp_id: 120
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch20"

  - platform: gpio
    name: A32 Pro Switch21
    id: "a32_pro_switch21"
    pin:
      xl9535: xl9535_hub_out2
      number: 4
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch21 Tuya
    dp_id: 121
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch21"

  - platform: gpio
    name: A32 Pro Switch22
    id: "a32_pro_switch22"
    pin:
      xl9535: xl9535_hub_out2
      number: 5
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch22 Tuya
    dp_id: 122
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch22"

  - platform: gpio
    name: A32 Pro Switch23
    id: "a32_pro_switch23"
    pin:
      xl9535: xl9535_hub_out2
      number: 6
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch23 Tuya
    dp_id: 123
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch23"

  - platform: gpio
    name: A32 Pro Switch24
    id: "a32_pro_switch24"
    pin:
      xl9535: xl9535_hub_out2
      number: 7
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch24 Tuya
    dp_id: 124
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch24"

  - platform: gpio
    name: A32 Pro Switch25
    id: "a32_pro_switch25"
    pin:
      xl9535: xl9535_hub_out2
      number: 10
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch25 Tuya
    dp_id: 125
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch25"

  - platform: gpio
    name: A32 Pro Switch26
    id: "a32_pro_switch26"
    pin:
      xl9535: xl9535_hub_out2
      number: 11
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch26 Tuya
    dp_id: 126
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch26"

  - platform: gpio
    name: A32 Pro Switch27
    id: "a32_pro_switch27"
    pin:
      xl9535: xl9535_hub_out2
      number: 12
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch27 Tuya
    dp_id: 127
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch27"

  - platform: gpio
    name: A32 Pro Switch28
    id: "a32_pro_switch28"
    pin:
      xl9535: xl9535_hub_out2
      number: 13
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch28 Tuya
    dp_id: 128
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch28"

  - platform: gpio
    name: A32 Pro Switch29
    id: "a32_pro_switch29"
    pin:
      xl9535: xl9535_hub_out2
      number: 14
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch29 Tuya
    dp_id: 129
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch29"

  - platform: gpio
    name: A32 Pro Switch30
    id: "a32_pro_switch30"
    pin:
      xl9535: xl9535_hub_out2
      number: 15
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch30 Tuya
    dp_id: 130
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch30"

  - platform: gpio
    name: A32 Pro Switch31
    id: "a32_pro_switch31"
    pin:
      xl9535: xl9535_hub_out2
      number: 16
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch31 Tuya
    dp_id: 131
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch31"

  - platform: gpio
    name: A32 Pro Switch32
    id: "a32_pro_switch32"
    pin:
      xl9535: xl9535_hub_out2
      number: 17
      mode: OUTPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro Switch32 Tuya
    dp_id: 132
    # hide from homeassistant ui
    internal: true
    # bind other switch, sync state
    bind_switch_id: "a32_pro_switch32"

binary_sensor:
  - platform: gpio
    name: A32 Pro DI01

    on_press:
      then:
        - switch.toggle: a32_pro_switch01

    id: "a32_pro_di01"
    pin:
      xl9535: xl9535_hub_in1
      number: 0
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro DI01 Tuya
    dp_id: 133
    bind_binary_sensor_id: a32_pro_di01
    internal: true



  - platform: gpio
    name: A32 Pro DI02
    id: "a32_pro_di02"
    pin:
      xl9535: xl9535_hub_in1
      number: 1
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro DI02 Tuya
    dp_id: 134
    bind_binary_sensor_id: a32_pro_di02
    internal: true

  - platform: gpio
    name: A32 Pro DI03
    id: "a32_pro_di03"
    pin:
      xl9535: xl9535_hub_in1
      number: 2
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro DI03 Tuya
    dp_id: 135
    bind_binary_sensor_id: a32_pro_di03
    internal: true

  - platform: gpio
    name: A32 Pro DI04
    id: "a32_pro_di04"
    pin:
      xl9535: xl9535_hub_in1
      number: 3
      mode: INPUT
      inverted: true
  - platform: tuya_wifi_mcu
    name: A32 Pro DI04 Tuya
    dp_id: 136
    bind_binary_sensor_id: a32_pro_di04
    internal: true

  - platform: gpio
    name: A32 Pro DI05
    pin:
      xl9535: xl9535_hub_in1
      number: 4
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI06
    pin:
      xl9535: xl9535_hub_in1
      number: 5
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI07
    pin:
      xl9535: xl9535_hub_in1
      number: 6
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI08
    pin:
      xl9535: xl9535_hub_in1
      number: 7
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI09
    pin:
      xl9535: xl9535_hub_in1
      number: 10
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI10
    pin:
      xl9535: xl9535_hub_in1
      number: 11
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI11
    pin:
      xl9535: xl9535_hub_in1
      number: 12
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI12
    pin:
      xl9535: xl9535_hub_in1
      number: 13
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI13
    pin:
      xl9535: xl9535_hub_in1
      number: 14
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI14
    pin:
      xl9535: xl9535_hub_in1
      number: 15
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI15
    pin:
      xl9535: xl9535_hub_in1
      number: 16
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI16
    pin:
      xl9535: xl9535_hub_in1
      number: 17
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "A32 Pro TMP1"
    pin:
      number: 1
      inverted: true


  - platform: gpio
    name: "A32 Pro TMP2"
    pin:
      number: 2
      inverted: true

  - platform: gpio
    name: "A32 Pro DL"
    pin:
      number: 0
      inverted: true

  - platform: gpio
    name: "A32 Pro DTUYA"
    pin:
      number: 21
      inverted: true

  - platform: gpio
    name: A32 Pro DI17
    pin:
      xl9535: xl9535_hub_in2
      number: 0
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI18
    pin:
      xl9535: xl9535_hub_in2
      number: 1
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI19
    pin:
      xl9535: xl9535_hub_in2
      number: 2
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI20
    pin:
      xl9535: xl9535_hub_in2
      number: 3
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI21
    pin:
      xl9535: xl9535_hub_in2
      number: 4
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI22
    pin:
      xl9535: xl9535_hub_in2
      number: 5
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI23
    pin:
      xl9535: xl9535_hub_in2
      number: 6
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI24
    pin:
      xl9535: xl9535_hub_in2
      number: 7
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI25
    pin:
      xl9535: xl9535_hub_in2
      number: 10
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI26
    pin:
      xl9535: xl9535_hub_in2
      number: 11
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI27
    pin:
      xl9535: xl9535_hub_in2
      number: 12
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI28
    pin:
      xl9535: xl9535_hub_in2
      number: 13
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI29
    pin:
      xl9535: xl9535_hub_in2
      number: 14
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI30
    pin:
      xl9535: xl9535_hub_in2
      number: 15
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI31
    pin:
      xl9535: xl9535_hub_in2
      number: 16
      mode: INPUT
      inverted: true
  - platform: gpio
    name: A32 Pro DI32
    pin:
      xl9535: xl9535_hub_in2
      number: 17
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI33
    pin:
      pcf8574: pcf8574_in_3
      number: 0
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI34
    pin:
      pcf8574: pcf8574_in_3
      number: 1
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI35
    pin:
      pcf8574: pcf8574_in_3
      number: 2
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI36
    pin:
      pcf8574: pcf8574_in_3
      number: 3
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI37
    pin:
      pcf8574: pcf8574_in_3
      number: 4
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI38
    pin:
      pcf8574: pcf8574_in_3
      number: 5
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI39
    pin:
      pcf8574: pcf8574_in_3
      number: 6
      mode: INPUT
      inverted: true

  - platform: gpio
    name: A32 Pro DI40
    pin:
      pcf8574: pcf8574_in_3
      number: 7
      mode: INPUT
      inverted: true

gp8403:
  id: my_gp8403
  voltage: 10V

output:
  - platform: gp8403
    id: gp8403_output_1
    gp8403_id: my_gp8403
    channel: 0
  - platform: gp8403
    id: gp8403_output_2
    gp8403_id: my_gp8403
    channel: 1

light:
  - platform: monochromatic
    name: "A32 Pro-DAC-0"
    id: a32_pro_dac_0
    output: gp8403_output_1
    gamma_correct: 1.0

  - platform: tuya_wifi_mcu
    name: "Tuya A32 Pro-DAC-0"
    # bind other light, sync state
    bind_light_id: a32_pro_dac_0
    output: gp8403_output_1
    dp_id: 173
    # hide from homeassistant ui
    internal: true
    gamma_correct: 1.0

  - platform: monochromatic
    name: "A32 Pro-DAC-1"
    id: a32_pro_dac_1
    output: gp8403_output_2
    gamma_correct: 1.0

  - platform: tuya_wifi_mcu
    name: "Tuya A32 Pro-DAC-1"
    # bind other light, sync state
    bind_light_id: a32_pro_dac_1
    output: gp8403_output_2
    dp_id: 174
    # hide from homeassistant ui
    internal: true
    gamma_correct: 1.0


sensor:
  - platform: adc
    pin: 7
    name: "A32 Pro A1 Voltage"
    update_interval: 5s
    attenuation: 11db
    filters:
      - lambda:
          if (x >= 3.11) {
            return x * 1.60256;
          } else if (x <= 0.15) {
            return 0;
          } else {
            return x * 1.51;
          }
  - platform: adc
    pin: 6
    name: "A32 Pro A2 Voltage"
    update_interval: 5s
    attenuation: 11db
    filters:
      # - multiply: 1.51515
      - lambda:
          if (x >= 3.11) {
            return x * 1.60256;
          } else if (x <= 0.15) {
            return 0;
          } else {
            return x * 1.51;
          }
  - platform: adc
    pin: 5
    name: "A32 Pro A3 Current"
    update_interval: 5s
    unit_of_measurement: mA
    attenuation: 11db
    filters:
      - multiply: 6.66666666
  - platform: adc
    pin: 4
    name: "A32 Pro A4 Current"
    update_interval: 5s
    unit_of_measurement: mA
    attenuation: 11db
    filters:
      - multiply: 6.66666666

  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Temperature Sensor"
    id: temperature_sensor
    address: 0x0000
    register_type: holding
    value_type: U_WORD
    unit_of_measurement: "°C"
    accuracy_decimals: 1
    filters:
      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
   
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Humidity Sensor"
    id: humidity_sensor
    address: 0x0001
    register_type: holding
    value_type: U_WORD
    unit_of_measurement: "%"
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

web_server:
  port: 80

font:
  - file: "gfonts://Roboto"
    id: roboto
    size: 20

display:
  - platform: ssd1306_i2c
    i2c_id: bus_a
    model: "SSD1306 128x64"
    address: 0x3C
    lambda: |-
      it.printf(0, 0, id(roboto), "A32 Pro");

   
yaml file download: 
.txt   A32_Pro-ESPHome_arduino_type_RS485_MODBUS_SENSOR.txt (Size: 23.44 KB / Downloads: 44)
RS485 sensor config PC software:
.zip   RS485-sensor-PC-tool.zip (Size: 4.08 MB / Downloads: 51)
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Find
Reply
xarouli5 Offline
Junior Member
**
Posts: 21
Threads: 0
Joined: Dec 2024
Reputation: 0
#2
12-13-2024, 10:07 PM
Will this sensor work with Home Assistant connected in A+B?

What is the code for yaml?
Find
Reply
admin Offline
Administrator
*******
Posts: 6,609
Threads: 844
Joined: Oct 2020
Reputation: 161
#3
12-14-2024, 01:17 AM
sure, it support home assistant, if your sever have RS485 port, you can connect directly.
yaml file already showed in this thread. it's same, just modify configure.yaml for home assistant.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Find
Reply
xarouli5 Offline
Junior Member
**
Posts: 21
Threads: 0
Joined: Dec 2024
Reputation: 0
#4
12-14-2024, 04:58 AM
The yamp code is the same you have here on this thread?
Find
Reply
admin Offline
Administrator
*******
Posts: 6,609
Threads: 844
Joined: Oct 2020
Reputation: 161
#5
12-15-2024, 06:31 AM
only need change RS485 rxd,txd pin define number.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Find
Reply
xarouli5 Offline
Junior Member
**
Posts: 21
Threads: 0
Joined: Dec 2024
Reputation: 0
#6
12-15-2024, 06:39 AM
(12-15-2024, 06:31 AM)admin Wrote: only need change RS485 rxd,txd pin define number.

Is there somewhere a tutorial for yaml code as I do not know how yaml works?
Find
Reply
admin Offline
Administrator
*******
Posts: 6,609
Threads: 844
Joined: Oct 2020
Reputation: 161
#7
12-15-2024, 06:44 AM
do you have a own server computer installed home assistant?
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Find
Reply
xarouli5 Offline
Junior Member
**
Posts: 21
Threads: 0
Joined: Dec 2024
Reputation: 0
#8
12-15-2024, 06:47 AM
Yes, home assistant installed already and running. AIO board used for automation.
Find
Reply
admin Offline
Administrator
*******
Posts: 6,609
Threads: 844
Joined: Oct 2020
Reputation: 161
#9
12-15-2024, 08:12 AM
what's your server? it's a PC? or it's a KinCony server16 controller? we need details.
YouTube: https://www.youtube.com/c/KinCony
Online Store: https://shop.kincony.com
Find
Reply
xarouli5 Offline
Junior Member
**
Posts: 21
Threads: 0
Joined: Dec 2024
Reputation: 0
#10
12-15-2024, 08:33 AM
It is a raspbery pi 5 8gb running home assistant on docker.
Find
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)