New KC868-A32 Arduino ESP32 32 Channel GPIO Module (with MOSFETs - without RELAYs)

[Aladin]

Hello,

What about a New KC868-A32 Arduino ESP32 32 Channel GPIO Module (with MOSFETs - without RELAYs like the existing model) ?
This will be more suitable for a family home which has around 32 switches and 32 lights.

Note: The number of digital inputs and digital outputs of the existing KC868-A16 model is insufficient for this type of house.

Thanks !

[admin]

you can check with A32 Pro, it have 40 digital input, 32 relay output. or do you need MOSFET output? if YES, you can check with KC868-H32BS controller, it have 32 channel digital input ports and 32 channel mosfet output.

[Aladin]

you can check with A32 Pro,  it have 40 digital input, 32 relay output. or do you need MOSFET output?  if YES, you can check with KC868-H32BS controller, it have 32 channel digital input ports and 32 channel mosfet output.

Thanks for you reply!

A32 Pro : I don't need relays (I need MOSFET outputs).
KC868-H32BS : Has 32 channels digital inputs ports and 32 channels MOSFET outputs
                         But doesn't have ESP32 for ESPhome or Arduino code.

So I suggest you make something close to "KC868-H32BS module" but with ESP32.

Thanks!

[admin]

OK, the shape similar as B16M style?

[vsajer]

Would it be possible to program the IFTTT function in KCS please? so that the trigger of the function is also DO(x)

Example: Used for automatic shutdown after switching on DO(x) via MQTT

[admin]

this is AUTO OFF function, you can set in "OUTPUT" webpage to config it. Then relay will auto off after turnned ON.

[Aladin]

Yes ! With 32 Digital inputs & 32 digital outputs like A16 ou like B16M without TUYA.

OK, the shape similar as B16M style?

[admin]

OK, in furture we will design B32M.