KC868-A2 ESP32 I/O pin define

[admin]

Relay1:15
Relay2:2

DS18B20/DHT11/DHT21/LED strip -1: 33
DS18B20/DHT11/DHT21/LED strip -2: 14

Ethernet (LAN8720) I/O define:

#define ETH_ADDR        0
#define ETH_POWER_PIN  -1
#define ETH_MDC_PIN    23
#define ETH_MDIO_PIN  18
#define ETH_TYPE      ETH_PHY_LAN8720
#define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT

RS485:
RXD:35
TXD:32

GSM:
RXD:34
TXD:13


DI1:36
DI2:39

IIC BUS:
SDA:4
SCL:16

[tugra]

Can u show every pın number ın thıs pıcture.Green termınal,black termınal etc.I'm newbıe sorry

[admin]

pin define: https://www.kincony.com/forum/showthread.php?tid=2691

in photo GPIO-1 and GPIO-2 are GPIO33 , GPIO14

[tugra]

Yes but ı try fınd the A,B,C slot GPIO number and B,A D1,D2 gpıo number ın green termınal

[admin]

Can you mark on the image, which port you want to know GPIO number?

[tugra]

Can you mark on the image, which port you want to know GPIO number?

ALL port pls

[admin]

Relay1:15
Relay2:2

DS18B20/DHT11/DHT21/LED strip -1: 33
DS18B20/DHT11/DHT21/LED strip -2: 14

Ethernet (LAN8720) I/O define:

#define ETH_ADDR        0
#define ETH_POWER_PIN  -1
#define ETH_MDC_PIN    23
#define ETH_MDIO_PIN  18
#define ETH_TYPE      ETH_PHY_LAN8720
#define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT

RS485:
RXD:35
TXD:32

GSM:
RXD:34
TXD:13


DI1:36
DI2:39

IIC BUS:
SDA:4
SCL:16

it already showed here.

[tugra]

Relay1:15
Relay2:2

DS18B20/DHT11/DHT21/LED strip -1: 33
DS18B20/DHT11/DHT21/LED strip -2: 14

Ethernet (LAN8720) I/O define:

#define ETH_ADDR        0
#define ETH_POWER_PIN  -1
#define ETH_MDC_PIN    23
#define ETH_MDIO_PIN  18
#define ETH_TYPE      ETH_PHY_LAN8720
#define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT

RS485:
RXD:35
TXD:32

GSM:
RXD:34
TXD:13


DI1:36
DI2:39

IIC BUS:
SDA:4
SCL:16

What's the PHY gpio?I'm using 4.3.1 idf.

[admin]

#define ETH_ADDR 0
#define ETH_POWER_PIN -1
#define ETH_MDC_PIN 23
#define ETH_MDIO_PIN 18
#define ETH_TYPE ETH_PHY_LAN8720
#define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT