KC816-A16 ESPHome modbus.

[aamelkin]

Hi all, i'm tring to connect r4dcb08 module (https://aliexpress.ru/item/1005002616932...1413511247) to the A16 board using ESPHome
Could you please share me some working config (demo config) for A16 board with some modbus device ? (Existing demo codes havn't modbus examles)
Thanks.

[admin]

i think you can download tasmota firmware, that support MODBUS

[aamelkin]

i think you can download tasmota firmware, that support MOD.BUS

I use ESPHome, not tasmota.

[admin]

1. you should have your device's modbus protocol
2. accroding to ESPHome config: https://esphome.io/components/modbus_controller.html

[aamelkin]

1. you should have your device's modbus protocol
2. accroding to ESPHome config: https://esphome.io/components/modbus_controller.html

I'm trying, but not successfull (
"No response reciverd" in ESPHome log.
Could you give me 100% working config for a16 board, with correct pins, UART config, etc... Thanks

[admin]

when have free time, i can try.
what device you will connect by RS485? sensor?

[aamelkin]

when have free time, i can try.
what device you will connect by RS485? sensor?

Now I try to connect r4dcb08 module:
https://aliexpress.ru/item/1005002616932...1413511247

Today I add on bus one more device - r4d3b16 module: 
https://aliexpress.ru/item/4000834191354...6cc28USe6P

Then I want add this device:
https://aliexpress.ru/item/4001341710948...5750837383

But I ask for ANY config with ANY device? but 100% working. Then i'll adupt it for my devices myself.

[admin]

do you have your device modbus protocol document?

[aamelkin]

do you have your device modbus protocol document?

Yes:
https://1drv.ms/u/s!AjrAGEbCBLlsgYgr1fqs...A?e=8wahvO