[Arduino IDE demo source code for KC868-SERVER]--#02-IR_RECEIVE code

[KinCony Support]

Code:

#include <IRremote.h>
IRrecv irrecv_22(22);// set ir_receive pin IO22
void setup() {

  Serial.begin(9600);
  irrecv_22.enableIRIn();
}

void loop() {
    if (irrecv_22.decode()) {
      if(irrecv_22.decodedIRData.decodedRawData!=(0)){
        Serial.print("irCode address: ");           
        Serial.println(irrecv_22.decodedIRData.address,HEX);
        Serial.print("irCode command: ");           
        Serial.println(irrecv_22.decodedIRData.command,HEX);
        Serial.print("irCode decodedRawData: ");           
        Serial.println(irrecv_22.decodedIRData.decodedRawData,HEX);
      }
      IrReceiver.resume();
    }
}