KC868-Server V1.48 new firmware update

[admin]

improvement:

add manufactory test commands for RS232

command-1 for set to test mode:
    set static IP:192.168.1.200 for ethernet
    set wifi work mode=TCP Server
    set ethernet work mode=TCP Server
    enable 4 chanenl analog input auto report
    set board RS485 address=1
    set board RS485 Baud rate=9600bps

command-2 for Restore factory settings:
    set wifi work mode=UDP
    set ethernet work mode=UDP
    disable 4 channel analog input auto report


  KC868_SERVER_V148_220413.zip (Size: 54.15 KB / Downloads: 374)
download the ZIP file , unzip update the bin file for KC868-H32B relay controller by USB-RS232 cable or ethernet cable.

[cris93ita]

Hello.
i uploaded this firmware into the wifi TCP server page, but now it isn't work anymore... how can i reset it?

[admin]

no, you have mistake update for the wifi module, you should update use by KinCony's update tool. give me your email, we send you the wifi module firmware.

[cris93ita]

no, you have mistake update for the wifi module, you should update use by KinCony's update tool. give me your email, we send you the wifi module firmware.

This is my email:

deitoscristian@me.com 

I upload the wifi firmware in the same mode as i uploaded the h32b 4.44 firmware?

[admin]

this is how to update firmware: https://youtu.be/LLIJe9VTVq8

[cris93ita]

this is how to update firmware: https://youtu.be/LLIJe9VTVq8

Ok, please can you send me the wifi firmware by email? Thank you a lot

[admin]

Monday when begin work , send to you.

[cris93ita]

Monday when begin work , send to you.

I have found this.. i tried to upload it by your firmware download tool but it doesn't work

http://www.hi-flying.com/download-center...0-firmware

[admin]

can you find the AP "LPT230" , if you can find, just upload wifi module firmware as before.
Note:
wifi module firmware should upload by wifi module's tool (webpage)
controller's firmware upload by kincony's bootloader tool.

[admin]

Monday when begin work , send to you.

I have found this.. i tried to upload it by your firmware download tool but it doesn't work

http://www.hi-flying.com/download-center...0-firmware

after you download the firmware package ZIP file, here have a file "HF-LPX30_Module_Upgrade and Debug_V1.4.pdf" , you can see here have details about download wifi module firmware.