Lesson33- how to debug KC868-A8S GSM module using AT command

[admin]

1. Test

AT

2. make a CALL

ATD13100000000;

3. receive a CALL

RING            display receive information
ATA              Answer the phone
AT+CHUP    Hang up

4. receive a SMS

+CMTI: "SM",1    display receive information
AT+CMGR=1        read No.1 SMS
AT+CMGL="ALL"  read all SMS
AT+CMGD=1        delete No.1 SMS
AT+CMGD=1,4    delete all SMS

5. send a SMS

AT+CMGF=1  set SMS mode=TEXT
AT+CMGS="phone number"
> this is a text sms from KinCony
send Ctrl+Z or HEX (0x1A)

arduino IDE source code for GSM serial port debug:
  AT-debug.zip (Size: 282 bytes / Downloads: 271)

  SIM7500_SIM7600 Series_AT_Command_Manual _V1.10.pdf (Size: 4.53 MB / Downloads: 373)

[admin]

HardwareSerial.cpp define serial port pins:
#ifndef RX2
#define RX2 15
#endif

#ifndef TX2
#define TX2 13
#endif

[alexanderhez]

HardwareSerial.cpp  define serial port pins:
#ifndef RX2
#define RX2  15
#endif

#ifndef TX2
#define TX2  13
#endif

hello, thank you for help ous.
please if can explain or make code for receive text message  
+CMTI: "SM",1    display receive information
AT+CMGR=1        read No.1 SMS
AT+CMGL="ALL"  read all SMS
AT+CMGD=1        delete No.1 SMS
AT+CMGD=1,4    delete all SMS

[admin]

here are many demo code for SMS recieve message:
https://www.kincony.com/forum/forumdisplay.php?fid=24