Lesson11 - how to use by own 433MHz RF / infrared remoter

[admin]

1. install ESP32 USB driver for KC868-Server, download from: https://www.kincony.com/download/CH341SER.zip

2. install ESP32 USB driver

3. download arduino IDE: https://www.arduino.cc/en/software/

4. install arduino IDE

5. config for ESP32: https://www.kincony.com/forum/showthread.php?tid=281

6. install rc-switch arduino library

7. download this RF / IR decode demo source code: 
  KC868-Server-wireless-decode.zip (Size: 3.89 KB / Downloads: 527)

8. detect your RF or IR remoter's key code

9. replace your own RF or IR remoter's key code

10. download firmware to KC868-Server by TYPE-C USB cable

[bogdan_0]

Before step 8 I suggest to add the setting of serial com in Arduino Tools->port, according to computer registered port.

[admin]

ok, thanks for suggestion.

[bogdan_0]

The IR codes are recognised for "NEC".
How do we proceed with other brands to learn their remotes codes?
Thank you for your trainings!

[admin]

many different brand's remoter can be learned. here is some details: https://esphome.io/components/remote_receiver.html

[ahmedk4444@yahoo.com]

Hi 
I can't find air condition Carrier in the lists and links , how i can find to change the code?

If i had big area that have 3 carrier units all 3 the same remote control how i can control each separately using one KC-868-AG that in the middle to control all 3 or individual?

Thanks

[ahmedk4444@yahoo.com]

For adding the control of home theater reciever remote control to home asistance and other multimedia units with different brand pls guide for those
I can provide the brand and model if need them.

[admin]

Hi 
I can't find air condition Carrier in the lists and links , how i can find to change the code?

If i had big area that have 3 carrier units all 3 the same remote control how i can control each separately using one KC-868-AG that in the middle to control all 3 or individual?

Thanks

take a photo of your air conditioner , what brand you are using?
if you want control each air conditioner separately. beside every air conditioner place one KC868-AG, let one KC868-AG only send IR signla to one air conditioner, note the IR sender direction.

[admin]

For adding the control of home theater reciever remote control to home asistance and other multimedia units with different brand pls guide for those
I can provide the brand and model if need them.

if you use IR remote, any way: you not need to know the brand of your device, just learn IR remote's button you will use, decode the IR , save the IR, then create home assistant button using the learned IR code to send.

[ahmedk4444@yahoo.com]

The Aircondition brand is Carrier, buy for each 1 AG exprnsive, shoud be a way to configure each air condition separetely with separate naminging and confihure individuly by thd coding then i can use with one AG in the area each one of identical Ac1,2,3 individully .

For multimedia learning each button is painful for AV reciver remote control more than 50 buttons, kmagine fir AV, projector, tv, blu ray, projrctor motorized screen  etc.