ESPHome configure for KC868-A8:
function list:
1. 8 relay output
2. 8 switch input trigger relay output by on_press action
3. monitor 2 channel analog input for DC
4. TEMP-1 port: 2 channel DS18B20 temperature sensor use by 1 ports, actually, you can connect multi DS18B20 by one wire.
5. TEMP-4 port: WS2812B LED strip for 1 meter (30 LEDs)
6. network by Ethernet cable
-----------------------------------------------------------------------------------------------------
esphome:
name: kc868-a8
platform: ESP32
board: esp32dev
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
password: "bfb55afbf347b27a4bda0a1d36ee994f"
web_server:
port: 80
# Example configuration entry for ESP32
i2c:
sda: 4
scl: 5
scan: true
id: bus_a
# Example configuration entry
ethernet:
type: LAN8720
mdc_pin: GPIO23
mdio_pin: GPIO18
clk_mode: GPIO17_OUT
phy_addr: 0
# Optional manual IP
manual_ip:
static_ip: 192.168.1.199
gateway: 192.168.1.1
subnet: 255.255.255.0
# Example configuration entry
pcf8574:
- id: 'pcf8574_hub_output'
address: 0x24
- id: 'pcf8574_hub_input'
address: 0x22
# Individual outputs
switch:
- platform: gpio
name: "switch1"
id: switch1
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch2"
id: switch2
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 1
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch3"
id: switch3
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 2
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch4"
id: switch4
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 3
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch5"
id: switch5
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 4
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch6"
id: switch6
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 5
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch7"
id: switch7
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 6
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
- platform: gpio
name: "switch8"
id: switch8
pin:
pcf8574: pcf8574_hub_output
# Use pin number 0
number: 7
# One of INPUT or OUTPUT
mode: OUTPUT
inverted: true
binary_sensor:
- platform: gpio
name: "input1"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch1
- platform: gpio
name: "input2"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 1
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch2
- platform: gpio
name: "input3"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 2
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch3
- platform: gpio
name: "input4"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 3
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch4
- platform: gpio
name: "input5"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 4
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch5
- platform: gpio
name: "input6"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 5
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch6
- platform: gpio
name: "input7"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 6
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch7
- platform: gpio
name: "input8"
pin:
pcf8574: pcf8574_hub_input
# Use pin number 0
number: 7
# One of INPUT or OUTPUT
mode: INPUT
inverted: false
on_press:
then:
- switch.toggle: switch8
# Example configuration entry
dallas:
- pin: GPIO14
update_interval: 5s
sensor:
- platform: dallas
address: 0xE701202C5ADED628
name: "Temperature_1"
id: Temperature_1
- platform: dallas
address: 0xBE012115DCBEBC28
name: "Temperature_2"
id: Temperature_2
- platform: adc
pin: GPIO34
name: "Analog-IN1"
update_interval: 5s
attenuation: 11db
- platform: adc
pin: GPIO35
name: "Analog-IN2"
update_interval: 5s
attenuation: 11db
light:
- platform: fastled_clockless
chipset: WS2812B
pin: GPIO33 # Pin Define connected with LED strip
num_leds: 150 #LEDs number
rgb_order: GRB
name: "light_strip"
effects:
- addressable_rainbow: ##defined 7 effects styles
- addressable_color_wipe:
- addressable_scan:
- addressable_twinkle:
- addressable_random_twinkle:
- addressable_fireworks:
- addressable_flicker:
-------------------------------------------------------------------------------
KC868-A8/A4 http command list for third party software integration:
read relay state:
http://192.168.1.199/switch/switch1
control relay:
http://192.168.1.199/switch/switch1/turn_on
http://192.168.1.199/switch/switch1/turn_off
http://192.168.1.199/switch/switch1/toggle
read DI state:
http://192.168.1.199/binary_sensor/input1
read temperature:
http://192.168.1.199/sensor/temperature_1
read analog input:
http://192.168.1.199/sensor/analog-in1
read LED strip:
http://192.168.1.199/light/light_strip
control LED strip:
http://192.168.1.199/light/light_strip/turn_on
http://192.168.1.199/light/light_strip/turn_off
http://192.168.1.199/light/light_strip/turn_toggle
debug send command for TEST example: curl -X POST http://192.168.1.199/switch/switch1/toggle
