home assistant RC 2022.6 mqtt config update for configuration.yaml

[admin]

home assistant MQTT breaking changes RC 2022.6

before MQTT config format:

switch:
  - platform: mqtt
    name: 'relay11'
    unique_id: relay11
    state_topic: 'relay32/80f9caa4068e78059e31c622/state'
    command_topic: 'relay32/80f9caa4068e78059e31c622/set'
    payload_on: '{"relay1":{"on":1}}'
    payload_off: '{"relay1":{"on":0}}'
    value_template: '{{ value_json.relay1.on }}'
    state_on: 1
    state_off: 0


new MQTT config format:

mqtt:
  switch:
  - name: 'relay11'
    unique_id: relay11
    state_topic: 'relay32/80f9caa4068e78059e31c622/state'
    command_topic: 'relay32/80f9caa4068e78059e31c622/set'
    payload_on: '{"relay1":{"on":1}}'
    payload_off: '{"relay1":{"on":0}}'
    value_template: '{{ value_json.relay1.on }}'
    state_on: 1
    state_off: 0


new MQTT config for two switches format:

mqtt:
  switch:
  - name: 'relay11'
    unique_id: relay11
    state_topic: 'relay32/80f9caa4068e78059e31c622/state'
    command_topic: 'relay32/80f9caa4068e78059e31c622/set'
    payload_on: '{"relay1":{"on":1}}'
    payload_off: '{"relay1":{"on":0}}'
    value_template: '{{ value_json.relay1.on }}'
    state_on: 1
    state_off: 0
   
  - name: 'relay22'
    unique_id: relay22
    state_topic: 'relay32/80f9caa4068e78059e31c622/state'
    command_topic: 'relay32/80f9caa4068e78059e31c622/set'
    payload_on: '{"relay2":{"on":1}}'
    payload_off: '{"relay2":{"on":0}}'
    value_template: '{{ value_json.relay2.on }}'
    state_on: 1
    state_off: 0

[heyheyhey]

Please Let me know why mqtt config update like this? 

1. What is difference? before and after?

2. If not. It has any problem?

I have already updated V.4.44 and attached RC snubber. But Sometimes mqtt in KC868-h32b has no response until reboot.

Thank you.

[admin]

home assistant RC 2022.6 version need this, at 2022.9 version will stop use old mqtt format. details see: https://www.home-assistant.io/blog/2022/...ase-20226/

[admin]

Please Let me know why mqtt config update like this? 

1. What is difference? before and after?

2. If not. It has any problem?

I have already updated V.4.44 and attached RC snubber. But Sometimes mqtt in KC868-h32b has no response until reboot.

Thank you.

maybe your home assistant have automatic updated new version?

[heyheyhey]

home assistant RC 2022.6 version need this, at 2022.9 version will stop use old mqtt format. details see: https://www.home-assistant.io/blog/2022/...ase-20226/

Thanks for your very fast feedback! It was very helpful!

[admin]

you are welcome.

[engmohades]

Is there a change in binary_sensorsyntax?


binary_sensor:
- platform: mqtt
name: 'H32B-input1'
unique_id: H32B-input1
state_topic: 'relay32/3dfd899b71b9d0bbad4f5a9d12345/state'
value_template: '{{ value_json.input1.on }}'
payload_on: 1
payload_off: 0

[admin]

yes, also is changed syntax.

[engmohades]

yes, also is changed syntax.

If like thses ? 

mqtt:
  binary_sensor:
  - name: 'H32B-input1'
    unique_id: H32B-input1
    state_topic: 'relay32/xxxxxxxxxxxxxxxxxxxxxx/state'
    value_template: '{{ value_json.input6.on }}'
    payload_on: 1
    payload_off: 0


Please review the formula in the attachment, and if there is an error, please correct it

[admin]

do you have tested output with new config file, work well?
now you only have problem with input mqtt syntax?