KC868-H32B Pro - Node-Red on Home Assistant debug message every 2 second

[admin]

i have use Node-Red with H32B Pro , no any auto feedback. i think there is some home assistant entity always send query command to H32B Pro you have made, so H32B pro will auto feedback. i just only install the Node-Red , work without home assistant.
   
   
   

[tekdara]

1. Do you have any update from your testing?

[admin]

1. Do you see my feedback? no this problem, check your home assistant or Node-red other nodes, must have query for every 2 seconds.

[tekdara]

OK, i will re-install HA and node-red again. For clearly

[admin]

i think you can install only Node-Red for a test firstly.

[tekdara]

HI, i got the problem now. it stop after i disable esp32 Developer mode in relay setting.
if i turn it on for homekit use, the debug message running. Why, How can we stop it event turn ON Esp32 Developer mode?

[admin]

you want to use Apple Homekit , but not want the feedback message to TCP ?

[tekdara]

yes, i want to use homekit but don't need feedback message.

[admin]

ok, we will check, then feedback to you.

[admin]

here is new firmware updated for KC868-H32B Pro for this problem. you can test it.

  H32B_Pro_V115_230226.zip (Size: 54.57 KB / Downloads: 158)