home assistant RC 2022.6 mqtt config update for configuration.yaml

[Aliman]

Can H32B pro use the new yam.l file that you provide in here?

Thanks
Regards,
Aliman

[admin]

sure, you can see sample config at here: https://www.kincony.com/kc868-h32b-integ...-mqtt.html

[Aliman]

sure, you can see sample config at here: https://www.kincony.com/kc868-h32b-integ...-mqtt.html

thank you for the fast respone.

regards,
Aliman

[admin]

you are welcome.

[Alex1987sar]

hello
I use kc868-h32 via TCP\IP
and this manual
https://www.kincony.com/home-assistant-r...odule.html

there is a problem whis a code

how to solve it?

HA says:
nvalid config for [mqtt]: The 'broker' option near /config/configuration.yaml:19 has been removed, please remove it from your configuration for dictionary value @ data['mqtt']. Got {'broker': '127.0.0.1', 'port': 1883, 'discovery': True, 'discovery_prefix': 'homeassistant'}. (See /config/configuration.yaml, line 19).

[admin]

if you are using KC868-H32 old controller, it's not support MQTT. you can take a photo of your controller whole box. let me have a look.

[engmohades]

HELLO 

I'm in the same problem  i used H32BS

[admin]

just remove the mqtt broker lines in configure.yaml file will be work fine.

[engmohades]

Now it works fine, thank you

I removed the following

  broker: 192.168.1.42
  port: 1883
  username: xxxxxx
  password: xxxxxxxx
 

[admin]

ok