KC868-A2 ESP32 I/O pin define

[admin]

Relay1:15
Relay2:2

DS18B20/DHT11/DHT21/LED strip -1: 33
DS18B20/DHT11/DHT21/LED strip -2: 14

Ethernet (LAN8720) I/O define:

#define ETH_ADDR        0
#define ETH_POWER_PIN  -1
#define ETH_MDC_PIN    23
#define ETH_MDIO_PIN  18
#define ETH_TYPE      ETH_PHY_LAN8720
#define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT

RS485:
RXD:35
TXD:32

GSM:
RXD:34
TXD:13


DI1:36
DI2:39

IIC BUS:
SDA:4
SCL:16

[tugra]

Can u show every pın number ın thıs pıcture.Green termınal,black termınal etc.I'm newbıe sorry

[admin]

pin define: https://www.kincony.com/forum/showthread.php?tid=2691

in photo GPIO-1 and GPIO-2 are GPIO33 , GPIO14

[tugra]

Yes but ı try fınd the A,B,C slot GPIO number and B,A D1,D2 gpıo number ın green termınal

[admin]

Can you mark on the image, which port you want to know GPIO number?

[tugra]

Can you mark on the image, which port you want to know GPIO number?

ALL port pls

[admin]

Relay1:15
Relay2:2

DS18B20/DHT11/DHT21/LED strip -1: 33
DS18B20/DHT11/DHT21/LED strip -2: 14

Ethernet (LAN8720) I/O define:

#define ETH_ADDR        0
#define ETH_POWER_PIN  -1
#define ETH_MDC_PIN    23
#define ETH_MDIO_PIN  18
#define ETH_TYPE      ETH_PHY_LAN8720
#define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT

RS485:
RXD:35
TXD:32

GSM:
RXD:34
TXD:13


DI1:36
DI2:39

IIC BUS:
SDA:4
SCL:16

it already showed here.

[tugra]

Relay1:15
Relay2:2

DS18B20/DHT11/DHT21/LED strip -1: 33
DS18B20/DHT11/DHT21/LED strip -2: 14

Ethernet (LAN8720) I/O define:

#define ETH_ADDR        0
#define ETH_POWER_PIN  -1
#define ETH_MDC_PIN    23
#define ETH_MDIO_PIN  18
#define ETH_TYPE      ETH_PHY_LAN8720
#define ETH_CLK_MODE  ETH_CLOCK_GPIO17_OUT

RS485:
RXD:35
TXD:32

GSM:
RXD:34
TXD:13


DI1:36
DI2:39

IIC BUS:
SDA:4
SCL:16

it already showed here.

W (1059) BTN 0:  PRESSED  30  10
W (1259) BTN 0:  PRESSED  50  10
W (1459) BTN 0:  PRESSED  70  10
W (1659) BTN 0:  PRESSED  90  10
W (1859) BTN 0:  PRESSED  110  10
W (2059) BTN 0:  PRESSED  130  10
W (2259) BTN 0:  PRESSED  150  10
W (2459) BTN 0:  PRESSED  170  10
W (2659) BTN 0:  PRESSED  190  10
W (2859) BTN 0:  PRESSED  210  10
W (3059) BTN 0:  PRESSED  230  10
W (3259) BTN 0:  PRESSED  250  10
W (3459) BTN 0:  PRESSED  270  10
W (3659) BTN 0:  PRESSED  290  10
W (3859) BTN 0:  PRESSED  310  10
W (4059) BTN 0:  PRESSED  330  10
W (4259) BTN 0:  PRESSED  350  10
W (4459) BTN 0:  PRESSED  370  10
W (4659) BTN 0:  PRESSED  390  10
W (4859) BTN 0:  PRESSED  410  10
W (5059) BTN 0:  PRESSED  430  10
W (5259) BTN 0:  PRESSED  450  10
W (5459) BTN 0:  PRESSED  470  10
W (5659) BTN 0:  PRESSED  490  10
W (5859) BTN 0:  PRESSED  510  10
I (5859) BTN 0: LONG PRESS DETECTED -- I see this in my monitor and my devices booting.How can I fix this ?