KinCony "KCS" 2023 new firmware under developing

[admin]

"KCS" means “KinCony Super” , this is a new firmware developed by KinCony for KC868-A series products in 2023. It has powerful functions and supports multiple communication protocols. It can manage various functions of the device through web pages, such as: input configuration, output configuration, monitoring management page, Timing schedule task mode, network configuration, communication protocol configuration, system configuration and other related functions

Input configuration:

Binding of digital input port and output port, setting of effective value of high and low level, support multiple trigger modes through digital input port, such as: single click, double click, hold on mode

Output configuration:

Output level invert, support delay auto off, support jog mode control, support interlock setting

monitoring management page:

Monitor the status of the input in real time through the web page, and manually control the output

Timing schedule task mode:

Support custom scheduled tasks by year, month, day, hour, minute

Network Configuration:

configuration of ethernet and wifi

Communication protocol configuration:

Support MQTT, HTTP, TCP Server, TCP Client, UDP Server, UDP Client, Modbus multiple communication protocols

Tuya App configuration:

Configure Tuya app license to remote control board by internet

System Configuration:

default parameter settings

[benlouisv@gmail.com]

When I change the DAC Settings in my tuya app it tells me Failed to save. What can I do?

[admin]

you can save again, whether work well.

[benlouisv@gmail.com]

you can save again, whether work well.

I tried again but this is what I get when I change the DAC value on the slider

---

you can save again, whether work well.

I tried again but this is what I get when I change the DAC value on the slider

[admin]

which board model you are using?

[benlouisv@gmail.com]

K868 A6

[benlouisv@gmail.com]

Any assistance why I cannot adjust the DAC in tuya app?

[admin]

your question have replied in your another topic.

[krzycholek]

Hello, Is the KCS firmware open-source? If not, I'd like to request for a feature: additional input function "state change" in input tab.
That feature would be useful for traditional (bi-stable) switch.

[admin]

do you means, want support INPUT trigger OUTPUT by traditional switch panel?