KC868-AIO configure yaml for ESPhome

[admin]

   

  KC868-AIO-ESPHome.txt (Size: 20.73 KB / Downloads: 1,251)

[AshS]

The ESPHome code shows Dallas on pin5.

dallas:
- pin: 5
update_interval: 60s

# Example configuration entry
sensor:

- platform: dallas
address: 0xec0921405caae128
name: "aio--ds18b20"


Where does it connect on the board?

[admin]

see photo. there are two GPIOs use for DS18B20.
   

[AshS]

Thank you.

[admin]

you are welcome

[krAAAAAAn]

Hello.  I need 62 inputs for my home automation (push buttons).  I can use the 56 digital inputs for that but I need 6 more, is it possible to use the analog input as digital input?

Thank you

[admin]

sure, no problem, just connect with a voltage to analog input, such as 5v or 3.3v, because analog input range is dc 0-5v.

[krAAAAAAn]

sure, no problem, just connect with a voltage to analog input, such as 5v or 3.3v, because analog input range is dc 0-5v.

Thanks a lot

[admin]

you are welcome

[chin0]

how can I use the SIM module with ESPhome?