"KCS" firmware STRING protocol document

[admin]

Note: This protocol document use for KinCony ESP32 smart controller:
KC868-A4 KC868-A6  KC868-A8 KC868-A8S KC868-A16 KC868-E16S KC868-A32 KC868-A64 KC868-A128 smart controller
Different board will have different channel of digital output, digital input , ADC, DAC, so the protocol is same , just according to the hardware resource to set channel number.

  KC868-A-series-protocol-String.pdf (Size: 135.93 KB / Downloads: 500)

[lcristofalo]

Note: This protocol document use for KinCony ESP32 smart controller:
KC868-A4 KC868-A6  KC868-A8 KC868-A8S KC868-A16 KC868-E16S KC868-A32 KC868-A64 KC868-A128 smart controller
Different board will have different channel of digital output, digital input , ADC, DAC, so the protocol is same , just according to the hardware resource to set channel number.

FANTASTIC !!!

Need only BIN firmware file now.

[admin]

you can download BIN file at this link: https://www.kincony.com/forum/showthread.php?tid=2536
"2023 new "KCS" firmware for KinCony ESP32 board detailed explanation" video tour at here: https://youtu.be/gJTUb1SGnII

[lcristofalo]

Note: This protocol document use for KinCony ESP32 smart controller:
KC868-A4 KC868-A6  KC868-A8 KC868-A8S KC868-A16 KC868-E16S KC868-A32 KC868-A64 KC868-A128 smart controller
Different board will have different channel of digital output, digital input , ADC, DAC, so the protocol is same , just according to the hardware resource to set channel number.

Dear,
String protocol cannot be activated for RS485 communication.  WHY?

This could be a great feature.
Please let see if this option can be activated.

Thanks & Regards.

[lcristofalo]

Note: This protocol document use for KinCony ESP32 smart controller:
KC868-A4 KC868-A6  KC868-A8 KC868-A8S KC868-A16 KC868-E16S KC868-A32 KC868-A64 KC868-A128 smart controller
Different board will have different channel of digital output, digital input , ADC, DAC, so the protocol is same , just according to the hardware resource to set channel number.

Dear Admin,

I am testing STRING protocol on TCP, is working very well.
Please can you make it available on RS485 communication?  

MODBUS-RTU seems not working well, would like to use STRING on RS485.

Thanks & Regards.

[admin]

RS485 use by MODBUS protocol, what problem with you of MODBUS testing? you can take a photo of your test screen. so that i can see what command you have sent.

[xoor]

Hi,

does string protocol work on KC868-AI, please?
My settings:
UDP Client: enable
remote address:255.255.255.255 (I have also tried server IP address 10.0.0.136)
Port: 9876
The Input port connects to GND. The monitoring page shows input green. 

I have a PC (IP 10.0.0.136) with Wireshark, the firewall is turned off, but I don't see any traffic. I turn the input on and off.
TCP client periodically sends something if I turn it on and monitor it, but it's just establishing a connection

[admin]

when next Monday we begin to work, we can check it.

[xoor]

Ok, thanks.
Do you plan to publish the source code for KCS?

[admin]

"KCS" not have open source plan now.