09-29-2023, 05:04 AM
(This post was last modified: 09-29-2023, 05:16 AM by juan11perez.)
(09-27-2023, 06:52 AM)admin Wrote: if router not ready, esp32 will always try to connect with ethernet connection.
you can download KCS firmware for a test. just let esp32 board power on, then router power off, wait for a moment, router power on, then check esp32 whether is connected to router by ethernet.
Thank you. I would expect what you say to be the normal behaviour; nevertheless, it just doesn't do that with esphome.
It does, however, work with tasmota using this template. https://templates.blakadder.com/kincony_KC868-A2.html
Also, with esphome you can only use ethernet or wifi. With Tasmota both work without problem